Re: 65 Belvedere wipers and motor?

[Akron Don <dgallimore@xxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
caadOuabOyW3Na/PC PowerScan
-------------------------------------------------------------------

I'm going to be busy the next few days (including Satrurday at the Mopar 
NATS in Columbus.)   I know I have a useable set of arms in the attic 
that I can dig up Sunday or I can try to find you a real good set at the 
NATS.  Let me know.

   Akron Don

Jim Altemose wrote:

> Don,
>
> Thanks for the info.  The pivots and the arm I have are both push on,
> which sounds like it's correct for 65..  But the pivots are
> considerably larger in diameter than the hole in the arm.  So there's
> two size flavors of push on.  Like I said, the a 5/8 socket just fits
> over the pivot.  I'm looking for at least one arm (two's better) that
> will fit the larger size.
>
> - Jim
> Jim Altemose, Long Island, NY
> '63 Polara 500 (Max Wedge), '65 Belvedere I (Street Wedge), '71 Bronco
>
>  

[AD removed for archives]
-------------------------------------------------------------------
Need Emergency Cash? Get Up To $500 Now! 
No Credit Checks, Easy & Fast Approval 
Cash in you account Overnight!
caadOurbOyW3Nf/911PaydayAdvance
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


bOyW3N.