RE: Wheel Stud Help
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Wheel Stud Help



[AD removed for archives]
-------------------------------------------------------------------
Take movies and games anywhere with a Free Playstation Portable!
caadGKZbOyW3Na/ProductTestPanel
-------------------------------------------------------------------

Jeff & Richard,

Thanks for the reply. My NAPA store now says come look through our 
parts. They are too busy answering phones and looking stuff up on the 
computer to actually look for the part and matching it up.
The old stud was .620 with the knurl crushed. The largest stud I could 
find was .614 on the knurl. I also need the knurl to be the full length 
of the sholder like the original to hold the drum.

Nick T.



Richard Kinsley wrote:
> 
> 
> Nick Tiberio wrote:
> > 
> > Does anyone know a NAPA or other national parts store, Part Number for 
> > rear axle wheel studs.
> --------------------------------------------------------------------
> 
> I had lots of trouble finding these too. Finally I just went to Car 
> Quest with an old stud and searched through their stock till I found a 
> reasonable match. It worked OK. I should have the info somewhere. If I 
> find the number I'll let you know. (Mine was a '64 Dodge)
> 
> 
> 
> 
> Rich Kinsley  '64 Polara 4door 

[AD removed for archives]
-------------------------------------------------------------------
Get $1000.00 Overnight! Fast and Easy!
No Credit Checks! Many Lenders are 100% Paperless!
Let The Wizard Find the right Lender for you!
caadFX6bOyW3Nf/911PaydayAdvance
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.








Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.