My issue is similar to Tim's. I have all new lines shoes, pads on the front etc. I went through 3 master cylinders before I found one that would let the fluid get to the back wheels. I bench bled every MC before installing. I have the 73 A body disc on the front so I got a MC for that car. When bleeding the back brakes, my pedal only goes half way down. I get fluid out of the back brakes but I've always thought that the pedal should go to the floor. Has anyone else that has changed over to front disc had the same experience? I also used the prop. valve from the 73 car. Only thing I did different is to plumb in a line-loc for the front brakes. Bill C. [Non-text portions of this message have been removed] ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. b7yoMz.