Re: Oil Filter Adapter

[Thomas R Hansen <trandco1@xxxxxxxx>]

===========================================================
Cancel your low-carb diet. Lose weight. Choose your own 
foods. Learn more about our program at:
caaccM7b7yoMza/ Dr. Smith
===========================================================

> When it comes to oil filters, size does matter. :) 
> More filter size means a bigger amount of filtering media to trap 
> debris 
> as well as a little more oil capacity in the engine. There's even a 
> 
> (gasp) F*rd filter that is bigger than a BB Mopar filter that fits 
> right 
> on Mopars. In fact, the BB Mopar/F*rd  filters even fit on a Mopar 
> 2.2 
> series engine K car, and are used there to replace the teacup sized 
> 
> original filter, allowing about 1/2 qt more oil in the 2.2 system. 
> 
> Gary H.
 I use the PH8A size on my Chrysler 3.3L, and the PH43 size on an
Intrepid 2.7L. 
Tom in Dallas

===========================================================
Sponsor a child today through Children International.  
Give a desperately poor child hope for a brighter future.
For only $18 a month you can make a difference!
caaccM4b7yoMzf/ Children's Int'l
===========================================================

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.