RE: Oil Filter Adapter

["Gary H." <62to65mopar@xxxxxxxxxxx>]

===========================================================
Let University of Phoenix make 2004 your year. Evening, 
weekend or FlexNet® classes ? over 130 locations. Look 
into our programs and get the degree that gets you going!
caaccMPb7yoMza/ UOP
===========================================================



When it comes to oil filters, size does matter. :)

At least it enhances bragging rights. ;-) 

More filter size means a bigger amount of filtering media to trap debris 
as well as a little more oil capacity in the engine. There's even a 
(gasp) F*rd filter that is bigger than a BB Mopar filter that fits right 
on Mopars. In fact, the BB Mopar/F*rd  filters even fit on a Mopar 2.2 
series engine K car, and are used there to replace the teacup sized 
original filter, allowing about 1/2 qt more oil in the 2.2 system. 

Gary H.



tduross1@xxxxxxxxxxx wrote:
> That's very interesting.
> You could put the oil filter on the fender well or firewall.
> It only allows a fram ph8a or equivalent but that's a BB filter, isn't 
> it?
> Tom

===========================================================
Graduate in less than 13 months with AIU?s Online virtual 
campus. Classrooms and student service as close as your 
computer. Highly accredited, study anytime ? anywhere.
caaccM2b7yoMzf/ AIU
===========================================================



----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.