Re: SS Springs - Length
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: SS Springs - Length



DON'T buy the spring extended mounts from Mancini. I warned you guys before 
about this. I KNOW, because I got them from Mancini and the distance from the 
mounting point to the center of the front spring bolt is like 6 inches. It will 
push your rear axle back that far. I had to send mine back after I found out 
they don't work. 
Just get any front spring hanger off any 60 B body car and it will be the 
right one. The front segment on a 64 B body should be 20 inches. Not sure about 
any other years. The distance between where the hanger bolts on and the center 
of the mounting bolt should be about 2 & 1/4 inches.

Bill C.

[Non-text portions of this message have been removed]

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz. 









Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.