Vacume leak is my first thought
too...........................MO
----- Original Message -----
Sent: Monday, February 10, 2014 3:14
PM
Subject: Re: Cam for my 440
Metering rods and springs do nothing at idle.
Check for vacuum leaks everywhere...carb base, rubber vac. lines,
intake-to-head gaskets, etc. Have you put a vacuum guage on the engine yet?
Also, check your distributor advance. It may have very light springs in it so
it won't return to no-advance setting until quite low RPM.
Just my thoughts...
----- Original Message -----
Sent: Monday, February 10, 2014 12:51
PM
Subject: Cam for my 440
Pulling my hair out!
I have a 440 cross ram in my 62 Belvedere making a clone 413 nostalgia
straight axle car. I finally got it running with new Edebrock E Street
Alum heads and Comp 23-227-4 cam.
Adv Dur Int 275 Exh 287
Dur @.050 231 & 237
Lift .525 .525
Lobe Sep 110.0
It runs really strong but will not idle. I was told this was a mild cam
for street and strip. It will not idle at less than 1500 rpm and I have to
keep a foot on the brake and one on the gas when at a stop and in gear. I
put a new 2800 stall converter in it. Do any of these things sound wrong to
anyone?
Being a converted mopar nut, I am really lost on how to tune this
engine and my engine builder is a holley carb guy, so he is no help. I have
changed the jets and metering rods and springs to no avail.
I am just digging a hole at this point and need all the help I can get.
Edelbrock said they could not help either.
David
--
David Blosser, Pres.
PallCon Pallets
239-293-4885
-- -- -- Please address private email -- email of interest
to only one person -- directly to that person. That is, email your parts/car
transactions and negotiations, as well as other personal messages, only to
the intended recipient. Do not just press "reply" and send your email to
everyone using the general '62-'65 Clubhouse public email address. This
practice will protect your privacy, reduce the total volume of mail and
fine-tune the content signal to Mopar topic. Thanks! 1962 to
1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html
and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. --
You received this message because you are subscribed to the Google
Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en. ---
You received this message because you are subscribed to the Google
Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. To unsubscribe
from this group and stop receiving emails from it, send an email to
1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx For more options, visit https://groups.google.com/groups/opt_out.
-- -- -- Please address private email -- email of interest
to only one person -- directly to that person. That is, email your parts/car
transactions and negotiations, as well as other personal messages, only to the
intended recipient. Do not just press "reply" and send your email to everyone
using the general '62-'65 Clubhouse public email address. This practice will
protect your privacy, reduce the total volume of mail and fine-tune the
content signal to Mopar topic. Thanks! 1962 to 1965 Mopar
Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html
and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. --
You received this message because you are subscribed to the Google Groups
"The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en. ---
You received this message because you are subscribed to the Google Groups
"The 1962 to 1965 Mopar Mail List Clubhouse" group. To unsubscribe from
this group and stop receiving emails from it, send an email to
1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx For more options, visit https://groups.google.com/groups/opt_out.
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/groups/opt_out.
|