RE: Starter for 64 Plymouth 383

[Rich Kinsley <rlkinsley@xxxxxxxxx>]

Jeff Adams wrote:
> 
> I've been running a Dakota starter on the 426 in my 64 Polara for 3 
> years with no issues. I believe the v6 and v8 Dakota starters are the 
> same. For what they cost from Autozone, though, you might be able to get 
> 
> a ministarter from Jegs.
> 
> Kevin Merkley wrote:
> > 
> > Hi Butch,
> > 
> > I'm pretty sure that the smaller starters are from the mid 90's Dodge 
> > Dakota trucks.
> > 
> > There has been a lot of discussion on this board about that exact topic.
> > 
> > Have fun.
> > 
> > K.
> > 
> > W.A.Edison wrote:
> > > 
> > > My 64 Sport Fury 383 has a smaller than factory starter on it, probably 
> > > due
> > > to the headers that are on the car. I suspect the starter is going to 
> > > need
> > > replacement soon and would like to know where I can buy a starter that 
> > > will
> > > work. Your advice is appreciated.
> > > Thanks/ Butch/ Ferndale, WA
=====================================================================

>From what i understand most any Mopar starter is interchangeable. I 
opted for a Summit mini-starter as it was cheaper since I didn't need a 
core to exchange. It works great and believe me it barely fits behind my 
headers! I had to buy a heat shield pad and work it in like tooth floss 
to get it around the starter.



Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.