Re: Push Button probs
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Push Button probs




OOPS just re-read that message...
It should have said "It does seem to be just going TO drive FROM neutral." rather than "It does seem to be just going FROM drive TO neutral."
Subtle difference but it may make a difference!
Robert

----- Original Message ----- From: "Robert" <r.lane@xxxxxxxxxx>
To: <1962to1965mopars@>
Sent: Wednesday, January 17, 2007 1:31 AM
Subject: Push Button probs




Hi guys

Happy New Year everyone! Sorry, I think I forgot to say that before!

A bit more help please...
Since getting the car back on the road, we've been having a spot of bother with the trans push buttons sticking. It started on the first trip out (back in September), with the fresh engine & trans back in the car. We stopped after a couple of miles to change drivers, then couldn't get the drive button to engage. The neutral was pushed in, but the drive button wouldn't depress far enough to engage and flick the neutral button back out. Well, it was being pushed in far enough, it just wouldn't do that last little bit to change gear! We eventually got it into drive, then back at the garage squirted some lubricant (cant remember what type) onto the rear of the mechanism up under the dash. A few more goes on the buttons got them all working again, so we were satisfied that all it needed after a year sitting idle was a bit of lube & a bit of use.

Since then, though, it has got stuck again, mostly at the start of a journey, when it's cold, but also occasionally after a long journey. It does seem to be just going from drive to neutral.

Has anyone else had problems like this? I'm not sure if it is just the mechanism up behind the dash, or whether it could be somewhere else between the pushbutton and the trans itself.

We did have the trans rebuilt while the engine was being done, and I cant recall having these problems (to this extent) before the trans was fixed, but they were never that easy to use. So maybe it is related to the work done on the trans, or maybe it's just that it needs more use to free itself up?

As it is now tho, I struggle to see how anyone could ever use the pushbuttons on the strip! And as that's what we hope to do in a few months time, I'd appreciate any suggestions!

Thanks

Robert
63 Polara 500
England

[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.




--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.410 / Virus Database: 268.16.13/632 - Release Date: 16/01/2007




----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
This email was sent to: arc.6265@xxxxxxxxxxxxxx

http:///u/?.. Or send an email to: 1962to1965mopars-unsubscribe@


http:///?p=





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.