RE: U-joint or Yoke ?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: U-joint or Yoke ?



I had a 69GTX housing in my 64 Polara w/ 8" steelies
and 275/60R15's with room to spare.Now I have a Dana
60 from a 69 RR. No clearance probs at all. 

--- mcwheels@xxxxxxxxxxxx wrote:

> Your free subscription is supported by today's
> sponsor:
>
-------------------------------------------------------------------
> Is your computer freezing up or slowing down?
> Repair corrupt files and harmful errors - protect
> your PC
> Take a 2-minute PC health check-up at no charge!
> caad3p7b7B6Msa/PC
> PowerScan
>
-------------------------------------------------------------------
> 
> Thanks Jake, If this is really a 69 RR rear I have
> then it should be the 
> same as your 68 GTX and it should fit my 63 Fury
> convertible. I have 14" 
> x 7" Keystone Raiders with 235/60 tires on there now
> and there isn't 
> much clearance but I think that has to do with the
> offset of these 
> wheels. They were on there when I bought the car and
> I love how they 
> look but they're unilug wheels and I was never crazy
> about unilugs. (We 
> hated those things when I worked for Goodyear) I'm
> converting to front 
> disc brakes too and I'm not sure these wheels will
> clear the calpers 
> either so I may go with some 15" x 7" police car
> wheels I have with 
> Plymouth dog dish hub caps. 
> 
> Dan, 
> 63 Fury, bench seat, rubber hoses and steel wheels
> and dog dishes. 
> (Neal should like that, except it does have a max
> wedge scoop lol) 
> 
> 
> Douglas J wrote:
> > 
> > I measured and really didnt find as much
> difference between the 68 GTX 
> > rear 
> > I have and the original in my 63 Sport Fury
> convertible as I had read in 
> > the 
> > tables.  Perhaps the track being the same is due
> to a different offset 
> > in 
> > the original wheels.  I have 8" mag wheels with
> 225-60 tires, they 
> > clear, 
> > but not by much.   If you have steel wheels you
> shouldnt have any 
> > problems 
> > with clearence.
> > 
> > Jake
> 
> 
> ----
> Please address private mail -- mail of interest to
> only one person -- directly to that person.  I.e.,
> send parts/car transactions and negotiations as well
> as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This
> practice will protect your privacy, reduce the total
> volume of mail and fine tune the content signal to
> Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
>
> 
> 


George



		
__________________________________ 
Yahoo! Mail - PC Magazine Editors' Choice 2005 
http://mail.yahoo.com


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.