Re: {Chrysler 300} R & R Rear Glass 64 300

["'ALLAN POZDOL' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Anybody?

On 12/13/2024 2:59 PM CST 'ALLAN POZDOL' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

 

 

I recall a recent post I believe was recommending using 1/8" washer tubing to hold out the top lip of the rear glass gasket from the inside. 

 

Does this help make it a one man job to remove the glass?

 

All shared experiences appreciated!

 

Allan

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/1309831380.729878.1734123577792%40connect.xfinity.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/1627216097.745557.1734213232941%40connect.xfinity.com.