RE: {Chrysler 300} Ok, I will cry Uncle...

Hi Bob,

I tried that and it did not work. All it does is twist the wires up as the bezel and the tube turned and the entire things screwed out leaving the plastic bulb base in the dash.

I fished out the bulb base, it barley fits through the hole. I now assume that there is a large nut laying someplace in the bottom of the dash. I suspect I will have to take off the AC outlet to get in there unless someone comes up with a plan B.

What a PITA for one bulb.

James

From: Bob Merritt <bob@xxxxxxxxxxxxx>
Sent: Monday, November 13, 2023 05:18
To: James Douglas <jdd@xxxxxxxxxx>
Subject: Re: {Chrysler 300} Ok, I will cry Uncle...

The red lense and bezel screws into the socket. Maybe you can get that off from the front

and swap the lamp all from the front side. I found my spare dash in the warehouse but

it is 34 degrees and I didn't stay long enough to pursue.

Bob

On 11/12/2023 11:15 PM, 'James Douglas' via Chrysler 300 Club International wrote:

Hi All,

On a ’64 how does one change the parking brake bulb? There is not way I can get my hand up there with the AC vent in place. Am I missing something?

James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61717CB958F39CA4D7EC4FB393B3A%40CY5PR19MB6171.namprd19.prod.outlook.com.