Re: {Chrysler 300} 1964 Sill Plates New

["'Joe Williams' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

   I installed a pair of these on my 300H.  As stated, they are a thinner metal then original, but look nice.  Be careful installing and they should work out for you.  Can't speak to the durability but my old ones were in really bad shape so this was the right decision for me.  I would do it again.

Joe 

On Friday, July 7, 2023 at 01:40:42 AM EDT, Rich Barber <c300@xxxxxxx> wrote:

I have some knowledge of the history of these plates.  Bottom line is they look pretty but may lack the strength to sustain installation and use without distortion.  The dies must be designed to form a product from the proper alloy and thickness of a material that will look and perform well.  Initial work did not result in satisfactory results.  Hopefully, enough improvements have been in material and process to create a rugged and beautiful product.  Caveat emptor.  Baby them in any case, especially when compressing carpet or windlace.  Don’t put a crink in a $200+ item. .  Feedback from early buyers would be welcomed.

 

Rich Barber

Brentwood, CA.

 

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Nick Taylor
Sent: Thursday, July 6, 2023 10:10 PM
To: James Douglas <jdd@xxxxxxxxxx>
Cc: Chrysler 300 List Server (chrysler-300-club-international@xxxxxxxxxxxxxxxx) <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} 1964 Sill Plates New

 

Vans Auto made them and sells them for $350 plus shipping. Someone said they're nice but not as thick as the originals so you have to be extra careful not to over tighten the screws.

 

On Thu, Jul 6, 2023, 8:43 PM 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Has anyone purchased a set of these new manufacture sill plates?

 

https://www.ebay.com/itm/174977769041

 

Even with the shipping at around $475 one would be hard pressed to get a shop to restore a set for that price. That is assuming they are as good or better than the factory units.

 

James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61710C7C0F630DF4E0AFA15E932DA%40CY5PR19MB6171.namprd19.prod.outlook.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFMXi_ogD4H5N5ZQXz8QLEAcE0Nn3EOfx%2B07VFy7jq%3D%3DXg%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/009c01d9b095%248faf5b30%24af0e1190%24%40ez2.net.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/925423160.465973.1688732850286%40mail.yahoo.com.