Here is some feedback. I own a set of these reproduced plates. They are beautiful to look at. They have very limited utility. They are too thin to actually use as sill plates so you should not step on them when you're for example waxing your roof. Tell passengers as they enter and exit not to step on the plates. Do not over tighten the screws as previously mentioned. Reproduction sill plates for other cars have a similar problem. These plates have been reproduced for the full size early 60s Fords where they are of similar quality and require similar light touch. However they look great, with the door open it'll look like a new car. Danny Plotkin Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: 'Joe Williams' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> Date: 7/7/23 8:27 AM (GMT-05:00) To: 'Nick Taylor' <nicksgaragesd@xxxxxxxxx>, 'James Douglas' <jdd@xxxxxxxxxx>, Rich Barber <c300@xxxxxxx> Cc: 'Chrysler 300 List Server' <chrysler-300-club-international@xxxxxxxxxxxxxxxx> Subject: Re: {Chrysler 300} 1964 Sill Plates New I installed a pair of these on my 300H. As stated, they are a thinner metal then original, but look nice. Be careful installing and they should work out for you. Can't speak to the durability but my old ones were in really bad shape so this was the right decision for me. I would do it again. Joe
On Friday, July 7, 2023 at 01:40:42 AM EDT, Rich Barber <c300@xxxxxxx> wrote:
I have some knowledge of the history of these plates. Bottom line is they look pretty but may lack the strength to sustain installation and use without distortion. The dies must be designed to form a product from the proper alloy and thickness of a material that will look and perform well. Initial work did not result in satisfactory results. Hopefully, enough improvements have been in material and process to create a rugged and beautiful product. Caveat emptor. Baby them in any case, especially when compressing carpet or windlace. Don’t put a crink in a $200+ item. . Feedback from early buyers would be welcomed.
Rich Barber Brentwood, CA.
From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Nick Taylor
Vans Auto made them and sells them for $350 plus shipping. Someone said they're nice but not as thick as the originals so you have to be extra careful not to over tighten the screws.
On Thu, Jul 6, 2023, 8:43 PM 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:
--
-- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/009c01d9b095%248faf5b30%24af0e1190%24%40ez2.net. For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/925423160.465973.1688732850286%40mail.yahoo.com. -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/64a821f6.170a0220.a1f97.8b59SMTPIN_ADDED_MISSING%40gmr-mx.google.com. |
Back to the Home of the Forward Look Network
Archive Sitemap