RE: {Chrysler 300} Drivers power window rats nest 300K
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: {Chrysler 300} Drivers power window rats nest 300K



Thanks Bob, I am going to need a complete set of the washers as they appear to be completely gone.  I will order as full set for the car as sooner or later I will do all the windows.

 

I HATE the diecast housing on these regulators. I had nothing but trouble with them in the past with the bottom of the housings cracking off at the motor mounts. Going through this again was one of my largest concerns on purchasing another 64.

 

I have contemplated having the housing scanned and seeing what it would cost to have a set machined from billet aluminum.

 

James

 

From: Bob Merritt <bob@xxxxxxxxxxxxx>
Sent: Monday, May 1, 2023 03:30
To: James Douglas <jdd@xxxxxxxxxx>
Subject: Re: {Chrysler 300} Drivers power window rats nest 300K

 

Hey Mr D;

I may have a naked 64 door out in the shop, will check later this week when I get a minute.

The window gear, maybe you mean this one:

http://www.chrysler300club.com/tech/windowgear/1a.html

John Grady sells his parts through Forward Look Parts, see

https://www.forwardlookparts.com/product-page/1960-1961-replacement-power-window-gearbox-gear

 

Give a shout if you need anything else.

Bob

 

On 4/30/2023 6:57 PM, 'James Douglas' via Chrysler 300 Club International wrote:

Hi All, I took the door panel off for the first time on the 300K. It is a good news bad news sort of thing.

 

The steel inside the door and down on the bottom of it looks like it left the factory last month. Stellar. The door panel has some warping on the bottom, but I think I can wet it and press it back to flat.

 

The window regulator is another story.

 

Someone with little knowledge got in there and really screwed it up. The one thing I know for sure is the gear is bad. I did not see it on the club website. Is the person who was making the gears in the tech section sill making or have them?

 

Also, if anyone has a door panel off on a ’63 or ’64 could I trouble you for a photo? I think someone cut and messed with the brackets that hold the motor and regulator to the webbing. I photo would help me to figure out what it should look like.

 

Thanks, James

 

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171AA3583BF0DC2022D0AAF93699%40CY5PR19MB6171.namprd19.prod.outlook.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB617191C55B7B38D8AA5E0EE0936E9%40CY5PR19MB6171.namprd19.prod.outlook.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.