RE: {Chrysler 300} Drivers power window rats nest 300K
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: {Chrysler 300} Drivers power window rats nest 300K



That would be great. It looks like they cut one of the supports, the one that comes down in front and to the right of the motor. They also drilled a 1 inch hole in the web to get to a bolt on the regulator-gear mechanism. The cover of the gear box has long bolts sticking out of it and all kinds of general mess.

 

Idiots!

 

I am going to have to pull the entire things apart and rebuild-replace a lot of it. I am hoping that the passenger side is not butchered as well.

 

James

 

From: apozdol@xxxxxxxxxxx <apozdol@xxxxxxxxxxx>
Sent: Sunday, April 30, 2023 20:28
To: James Douglas <jdd@xxxxxxxxxx>
Subject: RE: {Chrysler 300} Drivers power window rats nest 300K

 

Do you want a picture of the door inner panel? My door is off the car and apart.

 

From: 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Sunday, April 30, 2023 5:58 PM
To: Chrysler 300 List Server (chrysler-300-club-international@xxxxxxxxxxxxxxxx) <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} Drivers power window rats nest 300K

 

Hi All, I took the door panel off for the first time on the 300K. It is a good news bad news sort of thing.

 

The steel inside the door and down on the bottom of it looks like it left the factory last month. Stellar. The door panel has some warping on the bottom, but I think I can wet it and press it back to flat.

 

The window regulator is another story.

 

Someone with little knowledge got in there and really screwed it up. The one thing I know for sure is the gear is bad. I did not see it on the club website. Is the person who was making the gears in the tech section sill making or have them?

 

Also, if anyone has a door panel off on a ’63 or ’64 could I trouble you for a photo? I think someone cut and messed with the brackets that hold the motor and regulator to the webbing. I photo would help me to figure out what it should look like.

 

Thanks, James

 

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171AA3583BF0DC2022D0AAF93699%40CY5PR19MB6171.namprd19.prod.outlook.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61717F74E04A13C229B190FE936E9%40CY5PR19MB6171.namprd19.prod.outlook.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.