{Chrysler 300} steering shaft, not outer tube, diameter ?

["'James Douglas' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Hi All,

 

Since I am 80 miles from the car…does anyone know off the top of their head what the OD is on the steering column tube? I am going to add a couple of:

https://www.mcmaster.com/5915N111/

 

To my McMaster order for possible use for the jumper wires. These clamps are quick and practical, like Bob said he used with the added benefit of the lug to screw a ring terminal on.

 

I have the steering box here to measure, just not the shaft.

 

Thanks, James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171D74D0EBBFE393C1B635E93FE9%40CY5PR19MB6171.namprd19.prod.outlook.com.