Re: {Chrysler 300} Undercoating

On Monday, August 8, 2022 at 01:16:38 PM EDT, finsruskw@xxxxxxxxxxxxxxx <finsruskw@xxxxxxxxxxxxxxx> wrote:

Z-Barding led to the early demise of my FIRST EVER brand new car!!

Plugged all the drain holes and 2 years later I could stick my fingers through the bottom of the tailgate!!

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Cox
Sent: Monday, August 8, 2022 12:07 PM
To: Dan Plotkin <dplotkin@xxxxxxxxxxxxxxxxxxx>
Cc: John Grady <jkg@xxxxxxxxxxxxxxxxx>; Ron Kurtz <mark6268@xxxxxxxxxxxxx>; 300 Club <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} Undercoating

Widow etching with VIN

Another rip off.

Bob Haag

On Aug 8, 2022, at 1:00 PM, Dan Plotkin <dplotkin@xxxxxxxxxxxxxxxxxxx> wrote:

I don’t disagree. However many of mine are originals, all with original undercoating. The 3M spray cans of this work well to touch up areas disturbed by repairs. When I did my 61 Plymouth over I used no undercoat. If I had bought them new I would have refused undercoat. For as long as car salesman have crawled the surface of the earth they have strong armed buyers into undercoating, floor mats, snow tires and simonizing. Today its ceramic coatings. Before that scotch guard on the upholstery. There’s always something…

Danny Plotkin

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx [mailto:chrysler-300-club-international@xxxxxxxxxxxxxxxx] On Behalf Of John Grady
Sent: Monday, August 8, 2022 12:34 PM
To: Ron Kurtz <mark6268@xxxxxxxxxxxxx>
Cc: 300 Club <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} Undercoating

I think that stuff is bad , factory or not . Many 300 I have dealt with ( and Mercedes fancy rubber anti rust) are solid rust on top of the often difficult to get off undercoating . It only adheres in spots . Looking back over the years , best antirust thing is find low place with water in the floor drops while restoring and drill a 1/4 hole there . Maybe cement stainless washer around it from underside , attached with 6:32 brass or stainless screw . Then paint heavy with rustoleum . Rusty Jones all that stuff was just a $ ripoff .
Keeping water out also means keeping water in , sitting under constantly wet rug padding on the other side.. the real problem .
Mho
J
Sent from my iPhone

On Aug 8, 2022, at 12:24 PM, Ron Kurtz <mark6268@xxxxxxxxxxxxx> wrote:

Hello, everyone:

Was undercoating a dealer option in 1959? Found two layers of the stuff under my E.

Best,
Ron Kurtz
E #292
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1427207659.1772334.1659975865076%40mail.yahoo.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/A7B99AE7-81ED-47D3-AB23-C92F853DE837%40gradyresearch.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/001301d8ab48%244dcb8c50%24e962a4f0%24%40northeastretail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/D5CBD4E0-63C8-46CD-9D85-217AEBB618E8%40cox.net.