RE: {Chrysler 300} '59 Wheel cover gears

[<finsruskw@xxxxxxxxxxxxxxx>]

Corroded, not glued but may as well be.

Patience and lots of WD or similar

Good luck!!

 

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Ron Kurtz
Sent: Friday, March 25, 2022 4:58 AM
To: 300 Club <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} '59 Wheel cover gears

 

Hello, everyone:

 

I can't get the center gears off the hubcaps. I removed the 3 hex screws on the back but the gears appear to be glued (rreeaally glued) to the hub. Any solutions?

 

Best,

Ron Kurtz

E #292

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/690810918.137758.1648202285080%40mail.yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/03dd01d8404a%2479c48730%246d4d9590%24%40iowatelecom.net.