| Heat can help , aluminum expands more than steel liner . Large heat shrink gun? I empathize , many many years back , probably in late 60 ‘s I had an F , my first one needing new plastic emblems in the caps . I fought with this gently for days got nowhere , finally decided emblems no good anyway, so put them in a press , 3 came out but steel somewhat destroyed under emblem . Last one ( of course )the press punched a hole right through the top of the steel , still stuck fast —others mangled too . Then , I sort of realized all that piece does is hold the plastic up in place ? It has no structural role as far as I can see . So I put in emblem secured from behind with circular bead of silicone , keeps water out too . No problems , threw away the cones And their corrosion I know , non stock . Also non stick , non corrode ! Your mileage may vary ! John Sent from my iPhone On Mar 25, 2022, at 9:16 AM, finsruskw@xxxxxxxxxxxxxxx wrote:
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/372751E4-617C-475C-BF98-E950EE827C54%40gradyresearch.com.
|
