Re: {Chrysler 300} '59 Wheel cover gears

[Noel Hastalis <cpaviper@xxxxxxxxxxx>]

Hello Ron,

Here’s a piece from the Tech section of our Club’s website re these hubcaps -

http://chrysler300club.com/tech/f-hubcap/hubcapmain.html

Hope this helps!

Noel 

Sent from my iPhone

On Mar 25, 2022, at 4:56 AM, Ron Kurtz <mark6268@xxxxxxxxxxxxx> wrote:



Hello, everyone:

I can't get the center gears off the hubcaps. I removed the 3 hex screws on the back but the gears appear to be glued (rreeaally glued) to the hub. Any solutions?

Best,

Ron Kurtz

E #292

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/690810918.137758.1648202285080%40mail.yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CF098215-9152-4A43-BFED-617E5A1C101A%40comcast.net.