{Chrysler 300} 300F Astrodome question / Ignition Circuit
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} 300F Astrodome question / Ignition Circuit



Good morning from Wisconsin,

I’m preparing to install a Jeff Carter restored astrodome (pictured on the left) in my F.  I noted a resistor type connection on the back that is not present on an unrestored example. I’m not sure if my existing wiring harness has provisions for this resistor thing, as I’m not sure if I had Jeff restore the one that came out of the car.

 So, which color wires connect to this thing? 

Sidebar, is the ignition “hot” red wire circuit powered through through the astrodome? I ask because yesterday I tried to fire her up without the astrodome installed and I have no power at the ignition switch harness  


Thanks in advance for any guidance, Mike 


Inline image



Sent from Yahoo Mail for iPhone

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1317820332.1415101.1636821425655%40mail.yahoo.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.