Re: [Chrysler300] 300G Rocker Panels Replacement

["paul paulholm@xxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

On 10/19/2020 11:00 AM, John Sager cleanthegarageout@xxxxxxxxx 
[Chrysler300] wrote:

> You need to watch this video about C2C quality before spending the $$.

> My experience with the C2C replacement panels for my '53 was abysmal at
> best.

> Rocker Comparison for 57-59 Mopars <https://youtu.be/FW4o6JwsXOg>

>     Rocker Comparison for 57-59 Mopars

> <https://youtu.be/FW4o6JwsXOg>


> On Sunday, October 18, 2020, 07:54:05 PM EDT, Michael J Falcone
> mjf175@xxxxxxx [Chrysler300] <chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

> I bought them from Rock Auto about 5 years ago. They were made by
> Classic 2 Current. The metal thickness and quality was very good. I used
> them to patch my rear quarters, the part behind the doors because the
> profile is the same. I did not replace the rockers so I don't know how
> good the fit is.

> -----Original Message-----
> From: thomas tibbie ttibbie@xxxxxxxxxxx [Chrysler300]
> <Chrysler300-noreply@xxxxxxxxxxxxxxx>
> To: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx>
> Sent: Sat, Oct 17, 2020 6:31 pm
> Subject: [Chrysler300] 300G Rocker Panels Replacement

> *I'm looking at having a winter project of replacing the rocker panels
> on my 300G.

> *Looking for any suggestions on where to buy and possible problems I may
> incur.

> *Thanks
> *Tom T*

 From what I remember, for years what was available for rocker panel
replacements were actually NOT direct replacements but meant to be 
overlays. ergo they were caps covering the originals.

Leaving the thought that if a pair was 'sourced' serving as examples to 
be reproduced they too would be dimensionally caps and not 'original' 
dimensions.   There is that possibility.


-- 
Paul Holmgren
JCI #74145
To announce that there must be NO criticism of the President, or that
we are to stand by the President Right or Wrong, is not only UNPATRIOTIC
and SERVILE, but is Morally TREASONABLE to the American Public.
   Former Republican President, Theodore Roosevelt


------------------------------------
Posted by: paul <paulholm@xxxxxxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/