RE: [Chrysler300] 300G Rocker Panels Replacement
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] 300G Rocker Panels Replacement





I've heard uniformly bad feedback about Classic2Current. Cheap junk. The best way to go about this is to have original metal cut from rust free parts cars. Or slice out a cross section of good metal and find a sheet metal fabricator that will reproduce it for you in the desired length.
 
Ron


From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of ALLAN POZDOL apozdol@xxxxxxxxxxx [Chrysler300]
Sent: Monday, October 19, 2020 11:46 AM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] 300G Rocker Panels Replacement

Have you tried these folks?
http://www.blackcar-llc.com/mopar.html
Maybe AMS Obsolete as well...........
Allan
On 10/19/2020 10:00 AM John Sager cleanthegarageout@xxxxxxxxx [Chrysler300] <chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:


 



You need to watch this video about C2C quality before spending the $$. 

My experience with the C2C replacement panels for my '53 was abysmal at best. 

Rocker Comparison for 57-59 Mopars





On Sunday, October 18, 2020, 07:54:05 PM EDT, Michael J Falcone mjf175@xxxxxxx [Chrysler300] <chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:


 


I bought them from Rock Auto about 5 years ago. They were made by Classic 2 Current. The metal thickness and quality was very good. I used them to patch my rear quarters, the part behind the doors because the profile is the same. I did not replace the rockers so I don't know how good the fit is.


-----Original Message-----
From: thomas tibbie ttibbie@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Sat, Oct 17, 2020 6:31 pm
Subject: [Chrysler300] 300G Rocker Panels Replacement

 

I'm looking at having a winter project of replacing the rocker panels on my 300G. 

Looking for any suggestions on where to buy and possible problems I may incur.  

Thanks
Tom T






__._,_.___

Posted by: "Ron Waters" <ronbo97@xxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.