Thanks, Carl. Does anybody reproduce these or a usable facsimile?If not, does anyone in the club have a set they’d care to sell?Thanks!KeithNot tack welded. Held on lower v.c. studs by the nuts. J/Ram K uses three instead of four. Passenger side front is not used as the #2 and #4 wires are secured in a bracket that is mounted on the first exhaust manifold stud.
Carl Bilter
J consultant
From: Keith Langendorfer keith_A_Lang@xxxxxxxxx [Chrysler300]
Sent: Tuesday, June 18, 2019 9:14 PM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] 300J and Ram K Valve Covers
Hi Folks
Do the J and Ram K valve covers have the same ignition wire guide plates tacked welded to the valve covers as the 1964 413/360 engines? I’m converting a 413/360 four speed K to a short crossram and would like to know
Thanks!
Keith
Maine
<2E04BAED8A7447488F94A78E773B74B2..png>