Over the past several years I've had a reoccurring problem with the left front brake locking up (the other wheels are okay) to resolve this problem I have disconnected the vacuum line from the power brake assist. This frees up the locked left front brake but there is no power assist and it is very dangerous to drive with vacuum line disconnected. Unusually after driving the car a few miles I can reconnect the vacuum line and the left front wheel frees up but then the brakes will pull some to the left. I've checked the brake lines and they seem to be okay.Any suggestions.Has anyone replaced the original Power Brake system with a Dual Master Cylinder with power assist. If so could you supply parts numbers and manufactures?ThanksTom Tibbie
--Ray Jones. Y'all come on down an see us. Ya hear?
__._,_.___
Posted by: Ray Jones <1970hurst@xxxxxxxxx>
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang