[Chrysler300] 300G Brake Problem and replacement of the original Master Cylinder with a Dual Master Cylinder

["ttibbie@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Over the past several years I've had a reoccurring problem with the left front brake locking up (the other wheels are okay) to resolve this problem I have disconnected the vacuum line from the power brake assist. This frees up the locked left front brake but there is no power assist and it is very dangerous to drive with vacuum line disconnected. Unusually after driving the car a few miles I can reconnect the vacuum line and the left front wheel frees up but then the   brakes will pull some to the left.  I've checked the brake lines and they seem to be okay.

Any suggestions.

Has anyone replaced the original Power Brake system with a Dual Master Cylinder with power assist. If so could you supply parts numbers and manufactures?

Thanks

Tom Tibbie

 

__._,_.___

---

Posted by: ttibbie@xxxxxxxxxxx

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• New Members 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___