Re: [Chrysler300] AFB Bowl Volume - '63 Chrysler 413
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] AFB Bowl Volume - '63 Chrysler 413





Hi Mark,

I have never experienced the knocking you described, but I have been using the common replacement from O'Reilly's for about 5 years. Here's a link: https://tinyurl.com/ycsj4j98
You will see it looks like the style from the late 1960's but will for sure get you home for not much money.
Then you can take your time finding a period correct pump while you continue to enjoy your 300!

Gary Runkel
Rochester Hills, MI


From: "'Mark Lindahl' mplindahl@xxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: Chrysler300@xxxxxxxxxxxxxxx
Sent: Sunday, May 13, 2018 3:54:44 PM
Subject: RE: [Chrysler300] AFB Bowl Volume - '63 Chrysler 413

 


Hi All,

 

Thank you for all the input.  I checked my records.  Pump was installed in 2011 and filter was changed in 2013.  Since 2013, all has been well..  I store the car every year and there has been no problem for 6-7 yrears.  When I pick it up, the pump has the usual ticking sound, but now it knocks.  I have a new screw on filter (only $2.15), so I will try to replace that.  Since it ran for 20-30 seconds, I think it had some gas in the carburetor bowls and maybe some in the line in front of the electric pump.  It will start with starting fluid, but it quickly dies.  If the filter change does not work, I will bypass it to get it home.

 

Does anyone have a good suggestion for a new pump, if needed, now that John is out of business?  Thank you.

 

Regards,

Mark

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of leslie miklas ldmiklas@xxxxxxxxxxx [Chrysler300]
Sent: Saturday, May 12, 2018 11:11 PM
Cc: Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] AFB Bowl Volume - '61 G with base engine (375 HP)

 

 

Similar situation happened to me. Turns out the ethanol fuel had eaten the soft parts in the electric pump and the pump had tried to push the pieces down the line.. I'd suggest blowing out the line just to be safe.

 

Jeff miklas

On May 12, 2018 at 10:53 AM "Mark Lindahl mplindahl@xxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Hi John,

 

I went to get my ‘63 Chrysler out of storage. It started fine but only kept running 30 sec or less. When I activated the electric fuel pump, there was a knocking noise much louder than usual. I have never replaced the filter and there is no gas getting to the mechanical pump. Is the knocking noise a sign that the fuel filter is plugged?  I can always bypass it but that will Be next week. 

 

Regards,

Mark Lindahl


On Oct 10, 2011, at 12:23 PM, John Lazenby <french_fryguy@xxxxxxxxx> wrote:

 

We have the pump in stock (FEP12S).  Cost is $36.69 + shipping.
 
Phone 800 421-2011 to place an order.  I'm leaving the office in a few minutes heading east to NY for the meet.  Give anyone who answers the phone the part # listed and they'll get you fixed up.  I've had one on our F for probably 20 years and it never lets me down.
 
John Lazenby


________________________________
From: Bob Jasinski <rpjasin@xxxxxxxxxxx>
To: "'Knutsen, Mark ! C'" <Mark.Knutsen@xxxxxxxxxxxxxxxxx>; Chrysler300@xxxxxxxxxxxxxxx
Sent: Monday, October 10, 2011 9:54 AM
Subject: RE: [Chrysler300] AFB Bowl Volume - '61 G with base engine (375 HP)


 


Mark,


It's not worth the trouble. Just install an electric fuel pump by the tank,
with a little push button under the dash. Push to pump up, hit the key, and
it starts right up. No opening the hood, spilling gas, removing the air
cleaners, etc. I got my last pump from John Lazenby, nice small unit, solid
state and alcohol resistant.


Bob J


From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of Knutsen, Mark C
Sent: Monday, October 10, 2011 9:34 AM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] AFB Bowl Volume - '61 G with base engine (375 HP)


Does anyone know the volume of fuel that goes into the bowls when they
are assembled? My G sits too long between runs so I wanted to fill the
bowls through the vent to reduce crank time. I have a small oral syringe
(the condiment bottle was too big for the vent holes) and have tried
putting in 30CC per carb with little effect.


Mark Knutsen


300 G


[Non-text portions of this message have been removed]


[Non-text portions of this message have been removed]


[Non-text portions of this message have been removed]






__._,_.___

Posted by: GARY RUNKEL <moparfan@xxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.