Re: [Chrysler300] Fwd: 300 F Generator for Sale?

On May 11, 2018, at 5:52 PM, Noel Hastalis <cpaviper@xxxxxxxxxxx> wrote:

Mark,
If you don't get your generator issue resolved, you may want to pull the generator and regulator from your F and bring them to our Meet. John Grady will be there and may offer his further diagnosis.
Just a thought.
Noel

Sent from my iPhone

On May 11, 2018, at 4:27 PM, 'John Grady' jkg@xxxxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Hi Mark,

Most likely a short in field wire(the smaller one from F on generator, to something else , can put generator on full force all the time , ---if it burned while driving, carefully check harness from generator to regulator and the terminals at the ends are ok, on straight , not bent , and not touching anything , or grounded . Also that "under" nuts on the terminals are tight, before you put on wires, which centers the terminal bolts in the insulated holes. That harness gets beat up . A short like that on F wire that can hurt regulator too. Did you see ammeter pegged to C on the way home? Or excessively bright lights? If need be look under regulator, two open wire wound resistors there , one might one burned up and obviously open in middle if a short happened

The second thing is the "reverse current relay or "cutout" , one of the three relays in the voltage regulator. If "polarization" of generator lost, long story, (but have to do that with a new generator), look on line, do EXCATLY what it says. You can blow regulator by screwing that up,. Mechanics sometimes say "Oh I know how, then go at it to wrong terminals regulator is toast. . That cutout relay can stick shut when you stop the car. Then battery runs backwards into generator, tries to make it a motor, but it cannot turn stopped 413 motor.. This will cause the ammeter to go way over to D (discharge) and stay there with the car off....it burns up generator sitting still. It also kills battery in an hour or so. Usual cause is someone has the VR open, presses down the cutout relay with a finger. It will lock itself down and burn out generator. Problem is the finger, not the regulator.

Look inside gen see what burned, armature or field? Half of the gen may be ok. Also clue as to what happened . I think all 30-35 A generators from any 56 to 61 mopar fit. If non AC car. AC different. If you do not know why it fried --and you put on a new one it might burn up too.

Let us know...

John g

-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of mark love marklove@xxxxxx [Chrysler300]
Sent: Thursday, May 10, 2018 2:10 PM
To: Chrysler 300 List
Subject: [Chrysler300] Fwd: 300 F Generator for Sale?

> Hello all;
> just getting ready for the drive from Palm Desert to Rohnert Park and got the girl back from the shop after getting the A/C running. Opened the hood when I got home and the generator was smokin’. All the shop can think of is that what they can think of and there’s never a connection to what they were doing. Oh well. Going to get that one rebuilt but maybe there’s a chance someone has one out there ready to go.
> So, anyone have a rebuilt, ready to go generator for sale that I can buy and have it fed-exed to California overnight? Otherwise it’s thee Lexus to the show!
> Damn, it’s always something.
> Thanks in advance.
> Mark

------------------------------------
Posted by: mark love <marklove@xxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links