Re: [Chrysler300] 1965 power window motor
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 1965 power window motor

Sorry Don, I got sidelined.
My original Manual shows 2520-566-7 as being for front and rear.
It shows 2520-900-1 for 1/4 (Coupe?)

However, I was able to dig out some old motors and these are the # cast on  them.
2520-902 and 2520-903. These are left and right facing as the mount. I can send photos.
If needed, I can describe how I remove them. Extreme caution needed!!!
You can also have them out in a few minutes if you block the window from falling with a 2X4, and them use hole saw to cut a 1" hole over the bolt behind the door innerskin.


On Tue, Feb 27, 2018 at 11:12 AM, rjklinczar rjklinczar@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Don, I will look, but do you know if someone makes remanufactured ones?   Ron Klinczar, Buffalo, 65 300

Sent from my Verizon, Samsung Galaxy smartphone

-------- Original message --------
From: "Don Warnaar 300country@xxxxxxx [Chrysler300]" <>
Date: 2/26/18 2:11 PM (GMT-05:00)
Subject: [Chrysler300] 1965 power window motor


Does anyone have the part number for a 1965 Chrysler front door power window motor?  Perhaps the rear is the same.
Don Warnaar
New Jersey

Ray Jones. Y'all come on down an see us. Ya hear?


Posted by: Ray Jones <1970hurst@xxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to

Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use


Home Back to the Home of the Forward Look Network Archive Sitemap

Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.