[Chrysler300] F transmission mount donut
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] F transmission mount donut





Anybody know if this is made? Or source?

 

I have the rubber block type mounts, go on top of this, but found this rubber “wheeled Donut’ kind of thing , about 1.5” diameter at top of spring in lower trans mount was rotted out . Did not know it was there even , until today.

 

Related, A518 fits in an F floor !! (A blocks / early / late hemi only)



__._,_.___

Posted by: "John Grady" <jkg@xxxxxxxxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.