Re: [Chrysler300] wanted domes re 300G or 300H hubcaps
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] wanted domes re 300G or 300H hubcaps





What may get people confused here between F G H hub cap domes is that the F had a metal dome under the pot metal gear, that metal dome is part of the hub cap shape. That metal dome interacted with the aluminum gear on the F hubcaps and basically both pieces bonded together in a lot of case...need a press to remove gear dome on F hub cap a lot of the time.

The G and H hub caps did away with this metal dome, there's just the pot metal dome on the G and H hub caps...  

Jean-Yves




From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> on behalf of 'Mark Souders' MRS954@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx>
Sent: January 12, 2017 10:47 PM
To: 'David Schwandt'; lindsey@xxxxxxxxxxxxxxx; crc@xxxxxxxxxxxx; 'John Grady'; 'Joe Williams'; Chrysler300@xxxxxxxxxxxxxxx
Subject: RE: [Chrysler300] wanted domes re 300G or 300H hubcaps
 
 

I think the G and H are the same. The only difference btwn the wheel covers is the color. G is red and H is black. The center "gears" are the same.

-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 'David Schwandt' finsruskw@xxxxxxxxxxxxxxx [Chrysler300]
Sent: Thursday, January 12, 2017 5:16 PM
To: lindsey@xxxxxxxxxxxxxxx; crc@xxxxxxxxxxxx; 'John Grady' <jkg@xxxxxxxxxxxxxxxxx>; 'Joe Williams' <jfwilliams2007@xxxxxxxxx>; Chrysler300@xxxxxxxxxxxxxxx
Subject: RE: [Chrysler300] wanted domes re 300G or 300H hubcaps

G and H are different animals here…..

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of lindsey@xxxxxxxxxxxxxxx [Chrysler300]
Sent: Thursday, January 12, 2017 4:00 PM
To: 'Fern Rivard' crc@xxxxxxxxxxxx [Chrysler300]; John Grady; 'Joe Williams'; Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] wanted domes re 300G or 300H hubcaps

So you mean the "gear" piece. Club sells those.

Sent from my BlackBerry 10 smartphone on the Rogers network.

From: 'Fern Rivard' crc@xxxxxxxxxxxx [Chrysler300]

Sent: Thursday, January 12, 2017 3:57 PM

To: John Grady; 'Joe Williams'; Chrysler300@xxxxxxxxxxxxxxx

Reply To: Fern Rivard

Subject: Re: [Chrysler300] wanted domes re 300G or 300H hubcaps

By the domes, I’m referring to the part that fits on top of the hubcap which in turn has the (red/white/blue) medallion installed in the other portion and is attached to the actual hub cap with three separate screws.

I think that you were referring to the back plate (that sits on the backside of the hubcap) that holds the medallion securely toward the front of the dome.

Fern

From: mailto:Chrysler300-noreply@xxxxxxxxxxxxxxx

Sent: Thursday, January 12, 2017 8:15 AM

To: 'Fern Rivard' <mailto:crc@xxxxxxxxxxxx> ; 'Joe Williams' <mailto:jfwilliams2007@xxxxxxxxx> ; Chrysler300@xxxxxxxxxxxxxxx

Subject: RE: [Chrysler300] wanted domes re 300G or 300H hubcaps

We are talking the sheet metal backing cups not the gears, right? I have put the hupcaps together with epoxy on the plastic disc then sealing caulk , leaving the domes out. The plastic F and G inserts I had ? from Gary or club? Fit perfectly with tapered sides so the adhesive alone was more than enough. Never had any problems (despite no doubt purists wanting the cones) But if those cones corrode in, like they do, you wreck everything getting them out. ? 80% success rate? Often will not come out without cutting them , as top caves in or punctures, even with heat. Probably why needing them. Probably done like that at the whim of an engineer in 58, ..for ease of assembly --no real need for that with today’s adhesives?

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 'Fern Rivard' crc@xxxxxxxxxxxx [Chrysler300]
Sent: Wednesday, January 11, 2017 7:47 PM
To: Joe Williams; Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] wanted domes re 300G or 300H hubcaps

Yes Joe, they’re in his catalog but doesn’t have any stock.

Fern

From: mailto:Chrysler300-noreply@xxxxxxxxxxxxxxx

Sent: Wednesday, January 11, 2017 3:54 PM

To: Fern Rivard <mailto:crc@xxxxxxxxxxxx> ; Chrysler300@xxxxxxxxxxxxxxx

Subject: Re: [Chrysler300] wanted domes re 300G or 300H hubcaps

Hi Fern,

I believe that Gary Goers has the domes and the centers in his catalog.

Good luck,

Joe

On Monday, Janu ary 9, 2017 8:40 PM, "'Fern Rivard' crc@xxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Sorry but I made a mistake.

What I really need is the domes that attach to the hubcaps which in turn have the red/wht/blue inserts.

Does anyone have some of those reproduction domes that I could purchase?

Would like to have two or three of those.

Thanks from Fern

[Non-text portions of this message have been removed]

------------------------------------
Posted by: "David Schwandt" <finsruskw@xxxxxxxxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links



__._,_.___

Posted by: Jean-Yves Chouinard <jymopar@xxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.