Geeesh…., “I couldn’t live like that!!” From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of John Nowosacki jsnowosacki@xxxxxxxxx [Chrysler300] Sent: Saturday, February 27, 2016 1:03 PM To: Ray Jones Cc: David Schwandt; CAROLL RIPLEY; Joe Williams; yahoogroups Subject: Re: [Chrysler300] MARINE HEMI The engine must suck, squeeze, bang, and blow (in that order). If it were to try and blow, bang, suck, and squeeze, it would not run. On Sat, Feb 27, 2016 at 1:32 PM, Ray Jones <1970hurst@xxxxxxxxx> wrote: The crank goes round and round, the pistons go up and down, Valves open and close. The only thing that cares about rotation is the camshaft, starter and dist. The dist probably could just be rewired. If you were gonna re-purpose the engine, you would replace those parts, at least and then it would run in the correct rotation. I haven't built an engine in 17 years, so I might have missed something... Ray On Sat, Feb 27, 2016 at 9:03 AM, 'David Schwandt' finsruskw@xxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote: Imagine that!! 3 speeds backwards!! (TIC)!! From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of John Nowosacki jsnowosacki@xxxxxxxxx [Chrysler300] Sent: Saturday, February 27, 2016 9:00 AM To: CAROLL RIPLEY Cc: Joe Williams; yahoogroups Subject: Re: [Chrysler300] MARINE HEMI Is it true that some of these Marine engines rotate in the opposite direction when used in a 'twin screw' application? Might need to check that operation before putting it in a car! On Sat, Feb 27, 2016 at 9:39 AM, CAROLL RIPLEY ripinator@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote: Joe: That hemi would look pretty good in your 300 Sport. . . Rip On Wednesday, February 24, 2016 8:59 PM, "Joe Williams jfwilliams2007@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote: Hi All, A neighbor of a friend that I work with has a Chrysler hemi out of a '54 boat that he might be interested in selling. If anyone has any interest, please contact me off line and I will try to connect you with the owner. Thanks, Joe Williams Silver Spring, Md [Non-text portions of this message have been removed] -- Ray Jones. Y'all come on down an see us. Ya hear? [Non-text portions of this message have been removed] ------------------------------------ Posted by: "David Schwandt" <finsruskw@xxxxxxxxxxxxxxx> ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/