Later Mopars are even worse..Dodge trucks with 4WD and 9 1/4 axle ..Or, Any Mopar truck with 9 1/4 axle--- that axle is awful in this regard. Pretty awful period!!!! compared to our 8 3/4 . I agree...worn ball and trunnion U joint a "comes with it" aspect of 300's --combined with fast idle and solid engagement of pre 727 trans.. -----Original Message----- From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 'David Schwandt' finsruskw@xxxxxxxxxxxxxxx [Chrysler300] Sent: Tuesday, June 09, 2015 6:33 AM To: 'RICK AND DEBBIE CLAPHAM'; 'Marshall Larson'; chrysler300@xxxxxxxxxxxxxxx Subject: RE: [Chrysler300] Transmission "clank" sound moving between 2nd and 3rd .......................... It’s the Official MoPar “Clunk”! From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of RICK AND DEBBIE CLAPHAM rixpac@xxxxxxx [Chrysler300] Sent: Monday, June 08, 2015 8:15 PM To: David Schwandt; 'Marshall Larson'; chrysler300@xxxxxxxxxxxxxxx Subject: RE: [Chrysler300] Transmission "clank" sound moving between 2nd and 3rd .......................... I would say it would be more like a chime. _____ To: granitledge@xxxxxxxxx; Chrysler300@xxxxxxxxxxxxxxx From: Chrysler300-noreply@xxxxxxxxxxxxxxx Date: Mon, 8 Jun 2015 12:32:59 -0500 Subject: RE: [Chrysler300] Transmission "clank" sound moving between 2nd and 3rd .......................... I believe it is somewhat normal, All my Chrysler products w/ball and trunion joints have done that IIRC. Not to worry. It think it is the fore and aft action of the B&T that is responsible for the sound/noise Does it do this under WOT acceleration? If so, THEN THAT would be a problem IMHO only, your mileage will vary I’m sure From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Marshall Larson granitledge@xxxxxxxxx [Chrysler300] Sent: Monday, June 08, 2015 10:58 AM To: 300 Subject: Re: [Chrysler300] Transmission "clank" sound moving between 2nd and 3rd .......................... Perhaps a worn U-joint or Trunion with lots of slack. On Fri, Jun 5, 2015 at 2:06 PM, Chrysler300E@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote: Good day to everyone out there in 300 Land! On my 300E which runs fine, for some time I have had a "clank / clunk" sound when the car moves / shifts between 2nd and 3rd gears but only when I don't apply gas and don't accelerate at a normal pace. When I move at a normal pace and it shifts, there is no sound! Can it be a bushing / transmission mount of some sort that is worn as there is no slippage or anything in the transmission! Thanks to any and all responses in advance! Sincerely, Tom Miami, FL [Non-text portions of this message have been removed] -- Marshall Larson [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] ------------------------------------ Posted by: "David Schwandt" <finsruskw@xxxxxxxxxxxxxxx> ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang ------------------------------------ Yahoo Groups Links ------------------------------------ Posted by: "John Grady" <jkg@xxxxxxxxxxxxxxxxx> ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/