I would say it would be more like a chime.
To: granitledge@xxxxxxxxx; Chrysler300@xxxxxxxxxxxxxxx From: Chrysler300-noreply@xxxxxxxxxxxxxxx Date: Mon, 8 Jun 2015 12:32:59 -0500 Subject: RE: [Chrysler300] Transmission "clank" sound moving between 2nd and 3rd ..........................
I believe it is somewhat normal, All my Chrysler products w/ball and trunion joints have done that IIRC.
Not to worry. It think it is the fore and aft action of the B&T that is responsible for the sound/noise Does it do this under WOT acceleration? If so, THEN THAT would be a problem IMHO only, your mileage will vary I’m sure From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Marshall Larson granitledge@xxxxxxxxx [Chrysler300] Sent: Monday, June 08, 2015 10:58 AM To: 300 Subject: Re: [Chrysler300] Transmission "clank" sound moving between 2nd and 3rd .......................... Perhaps a worn U-joint or Trunion with lots of slack. On Fri, Jun 5, 2015 at 2:06 PM, Chrysler300E@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote: Good day to everyone out there in 300 Land! On my 300E which runs fine, for some time I have had a "clank / clunk" sound when the car moves / shifts between 2nd and 3rd gears but only when I don't apply gas and don't accelerate at a normal pace. When I move at a normal pace and it shifts, there is no sound! Can it be a bushing / transmission mount of some sort that is worn as there is no slippage or anything in the transmission! Thanks to any and all responses in advance! Sincerely, Tom Miami, FL [Non-text portions of this message have been removed] -- Marshall Larson [Non-text portions of this message have been removed] __._,_.___ Posted by: RICK AND DEBBIE CLAPHAM <rixpac@xxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |