Re: [Chrysler300] 300H valve adjustment

["'tomlin' tomlin@xxxxxxxxx [Chrysler300]" <Chrysler300@xxxxxxxxxxxxxxx>]

Mike,
  You may also try to obtain an old valve cover and cut the middle out with 
shears or jig saw with metal cutting blade.  I have kept one around for many 
years and it helps when you need to run with access to the rockers. 
Controls the oil at least mostly.
Tim Tomlinson

-----Original Message----- 
From: Michael Moore mmoore8425@xxxxxxx [Chrysler300]
Sent: Friday, May 09, 2014 11:22 PM
To: paul paulholm@xxxxxxxxxxxxx [Chrysler300]
Subject: Re: [Chrysler300] 300H valve adjustment

What a terrific idea! I will do something like that also then.

Thanks for all the help! I wish I could find Cometic 4 bolt valve cover 
gaskets,
Best, Mike Moore


On May 9, 2014, at 8:38 PM, paul paulholm@xxxxxxxxxxxxx [Chrysler300] 
<Chrysler300@xxxxxxxxxxxxxxx> wrote:

On 5/9/2014 8:15 PM, Michael Moore mmoore8425@xxxxxxx [Chrysler300] wrote:

> Stephen, Paul, Ray, John, Marchal et al:

> Thank you all for your great input.
>  I am a stock kind of a person-all I would LIKE to have is something
> close to what was delivered in 1961. I am not interested in racing.

> I have spent the afternoon removing the valve cover  on the passenger
> side and all plugs. I did not follow the path of getting the correct
> piston at TDC to get it off.

> I removed the a/c plenum instead because it needs some work done on it
> anyway. I am not going to use a degree wheel as Barnes insists I must, I
> am going to pretend it's a Chrysler cam (other than setting lash) and
> just follow the shop manual procedure for a 300H with sold lifter.

> I am going to set the valve lash running (hot) and clean up the mess
> later. One reason is that I am working alone and just can't turn the
> engine precisely enough to get the correct rotational position to adjust
> the valves. I am thinking it will be easier to clean up  the mess!

>  Especially if I do one side at a time and leave the valve cover on the
> one I'm not adjusting.

> Best, Mike Moore

ALRIGHTY, zounds like you have a plan,  If like me you just might be
interested in other stuff as well.  :-)

I have a pile of NICE magnets, some plastic sheeting held in place with
good magnets will keep a lot of earl spray controlled.
Use it to cover a lot of your fender well liner, and some other areas
that will probably get squirted.  Just an Idea.
Can REALLY lessen the cleanup task!

I have something like that rigged up for bleeding brakes when the master
cylinder wants to squirt fluid up from the open fill cavity.


-- 
Paul Holmgren
On account of being a democracy and run by the people,
we are the only nation in the world that has to keep a
government four years, no matter what it does.
    Will Rogers


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the 
"Leave Group" button

For list server instructions, go to 
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to 
http://www.forwardlook.net/300-archive/search.htm#querylangYahoo Groups 
Links






------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the 
"Leave Group" button

For list server instructions, go to 
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to 
http://www.forwardlook.net/300-archive/search.htm#querylangYahoo Groups 
Links





------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/