Re: [Chrysler300] 1962 Chrysler sill molding
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 1962 Chrysler sill molding





Thanks, Rich,
I did receive the picture of your K.
Doug


From: "Rich Barber" <c300@xxxxxxx>
To: 2HsandaHeritage@xxxxxxxxxxx, "Michael Moore" <mmoore8425@xxxxxxx>
Cc: "chrysler300@xxxxxxxxxxxxxxx Club" <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Monday, March 24, 2014 5:40:39 PM
Subject: RE: [Chrysler300] 1962 Chrysler sill molding

I believe you can send pictures to an individual, just not to the server.  If you attach pictures and send to both, the individual and the club server, the pictures will go through to the individual but not to the server.  To test this, I’m attaching a picture of our ’64 300K convertible.   Mike & Doug:  please confirm this theory by letting me know whether or not you receive the picture.

 

C300K’ly,

Rich Barber

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 2HsandaHeritage@xxxxxxxxxxx
Sent: Monday, March 24, 2014 3:00 PM
To: Michael Moore
Cc: chrysler300@xxxxxxxxxxxxxxx Club
Subject: Re: [Chrysler300] 1962 Chrysler sill molding

 

 

Hi Mike,

I believe that I have some H restoration pictures that show the clip locations.

Oh - I forgot, I can't attach pictures.

Will send you a separate e-mail.

Doug Warrener

 


From: "Michael Moore" <mmoore8425@xxxxxxx>
To: "chrysler300@xxxxxxxxxxxxxxx Club" <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Monday, March 24, 2014 10:07:18 AM
Subject: [Chrysler300] 1962 Chrysler sill molding

 

 



This morning I removed the "rattly" and loose sill molding from the drivers side of my 300H..

 

I had previously purchase a set of 10  clips for both sides.

On my loose drivers side, there are only 4 molding clips installed. It looks like the missing one is up front very close to the front screw. 

 

 

(1.) Does a clip go that close? There are no holes there as that area had extensive rust repair many years ago and it wasn't drilled I guess.

 

 

(2.) What is the proper way to install the stainless molding once the clips are in place?  

(a.) Slide the molding in front the front and risk paint damage

 (b.) Somehow lift up and snap in?

 

Thanks, Mike Moore

300H

 




__._,_.___


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.