Re: [Chrysler300] 1962 Chrysler sill molding

[2HsandaHeritage@xxxxxxxxxxx]

Hi Mike,

I believe that I have some H restoration pictures that show the clip locations.

Oh - I forgot, I can't attach pictures.

Will send you a separate e-mail.

Doug Warrener

---

From: "Michael Moore" <mmoore8425@xxxxxxx>
To: "chrysler300@xxxxxxxxxxxxxxx Club" <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Monday, March 24, 2014 10:07:18 AM
Subject: [Chrysler300] 1962 Chrysler sill molding

 

This morning I removed the "rattly" and loose sill molding from the drivers side of my 300H..

I had previously purchase a set of 10  clips for both sides.

On my loose drivers side, there are only 4 molding clips installed. It looks like the missing one is up front very close to the front screw. 

(1.) Does a clip go that close? There are no holes there as that area had extensive rust repair many years ago and it wasn't drilled I guess.

(2.) What is the proper way to install the stainless molding once the clips are in place?  

(a.) Slide the molding in front the front and risk paint damage

 (b.) Somehow lift up and snap in?

Thanks, Mike Moore

300H

__._,_.___

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___