Re: [Chrysler300] Corbin (wire) Clamp Pliers

[Keith Boonstra <kboonstra@xxxxxxxxxxxx>]

I spent less than $20 as I recall on a KD 3975 Corbin clamp pliers, and I
was impressed by how much it improved my vocabulary.

Keith Boonstra
-


On Mon, Jul 29, 2013 at 3:06 PM, Knutsen, Mark <
Mark.Knutsen@xxxxxxxxxxxxxxxxx> wrote:

> **
>
>
> Any recommendations on a good set of pliers to use on our wire style
> clamps? I have used channel locks with varying degrees of success. I also
> have purchased a few tools that were supposed to work for Corbin clamps
> with pretty dismal results.
>
> Thanks
>
> Mark Knutsen
> 300 G
>
> [Non-text portions of this message have been removed]
>
>  
>


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/