*The pliers I've used for the last 40 years or so have a grove along the jaw from front to middle and one across the jaw from side to side. * *This allows you to grasp the wires and open them up from straight on or from a sideways grip, along the hose. * *Ray* On Mon, Jul 29, 2013 at 2:06 PM, Knutsen, Mark < Mark.Knutsen@xxxxxxxxxxxxxxxxx> wrote: > ** > > > Any recommendations on a good set of pliers to use on our wire style > clamps? I have used channel locks with varying degrees of success. I also > have purchased a few tools that were supposed to work for Corbin clamps > with pretty dismal results. > > Thanks > > Mark Knutsen > 300 G > > [Non-text portions of this message have been removed] > > > -- *Ray Jones. Y'all come on down an see us. Ya hear?* [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/