RE: [Chrysler300] Using Dextron 5 in an Aluminum Torqueflight
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] Using Dextron 5 in an Aluminum Torqueflight



Mark, I'm sorry I went off on a bit of a tangent and didn't answer your question, it seems my point was lost in translation. If your transmission guy can't tell you whether or not Dexron 5 will cause problems in your torqueflite, I'd be suspicious what else he doesn't know....just sayin'. How much milage did you get out of your last build over 21 years? You should be seeing at least 100k miles, gaskets and seals aside.
 
I've only ever built two automatic transmissions in my life, both in shop class in high school.....I don't profess to know the answer to your question but will add this. Aren't all modern transmissions aluminum alloy? If Dexron 5 is okay in those, what is your concern in regards to the aluminum TF specifically? When it comes to compatibility, I'd be more concerned with the friction characteristics and the effects it might have on the clutches and seals.   
 
Ryan 
 



To: chrysler300@xxxxxxxxxxxxxxx
From: mplindahl@xxxxxxxxxxxxx
Date: Mon, 14 May 2012 19:10:16 -0700
Subject: [Chrysler300] Using Dextron 5 in an Aluminum Torqueflight

  



Hi All,
 
Just to clarify, the transmission shop that rebuilt my torqueflight was the same shop that rebuilt it in 1990 for $350 including taking it out and reinstalling it.  In 1990, it ran perfect.  and worked well until 2011.  When I replaced the 383 with the 413, I was convinced to have the trans checked which later turned into a rebuilding project.  It worked fine when the 383 was pulled, but upon inspection there were a few parts that were worn and ready to fail (Sprag Pring Retainer).
 
The guys in this club that rebuild transmissions probably know every step in the shop manual by heart.  The shops that rebuild a torqueflight once every 3-5 years or so don't know the details.  I gave this guy the shop manual, but no one reads books these days, so I really don't know if it meets the original specs or not.  
 
What I really want to know is will Dextron 5 cause problems to an aluminum torqueflight?
If you don't know, that's OK.  If you have any facts, please pass them along.
 
We can debate good mechanics and bad mechanics all day long.  When you have a modern trans rebuilt by a mechanic, do you really know if it is truly rebuilt to stock specs or are you just happy when you put it in DRIVE and it goes down the road?
 
Thanks for your help.
Mark Lindahl

--- On Mon, 5/14/12, Mark Souders <MRS954@xxxxxxx> wrote:

From: Mark Souders <MRS954@xxxxxxx>
Subject: Re: [Chrysler300] Using Dextron 5 in an Aluminum Torqueflight
To: chrysler300@xxxxxxxxxxxxxxx
Date: Monday, May 14, 2012, 7:51 PM

  

When my transmission was rebuilt about 13 or 14 years ago, it was done by an old time tranny guy who was an expert with Chrysler transmissions, and considered one of the best in the state of SC. When I finally got the car together and fired it up, it would not go into any gear, no matter which button I pushed. To make a long story short, there was a small washer lodged between the valve body and the thingy it fastens to. I'm no expert by any stretch of the imagination, but when I removed the washer and put it back together, it worked like a brand new tranny. So my point is, no matter if the guy is a novice or an expert, mistakes can happen. Hopefully the more reputable shop will make it right for the customer. In my case, the transmission and the shop were separated by about 600 miles, and the guy who rebuilt it retired, closed the shop, and moved to Florida, where he later passed away.

Regards,
Mark Souders
300H
Mohrsville, PA

-----Original Message-----
From: Ryan Hill <ryan_hillc300@xxxxxxxxxxx>
To: Bill Huff <czbill@xxxxxxxxxx>; mplindahl <mplindahl@xxxxxxxxxxxxx>; chrysler300 <chrysler300@xxxxxxxxxxxxxxx>
Sent: Mon, May 14, 2012 8:37 pm
Subject: RE: [Chrysler300] Using Dextron 5 in an Aluminum Torqueflight

I'm inclined to agree with Bill. Aside from finding a shop that actually listens 
to you, you need to find a transmission rebuilder that understands 
transmissions....all of them (new and old). There are alot of so called 
'technicians' these days that have been taught how to disassemble and then 
reassemble mechanical devices like transmissions, over and over and over. 
Problem is, very few actually understand what it is they're working on and how 
it functions. I'm often shocked at the level of understanding some of the 
younger mechanics actually have.....never mind service managers. I'm not an 
expert on fluids but your transmission guy should be, sounds like he's crossing 
his fingers as you drive away. 

Ryan Hill 

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]




 		 	   		  

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.