Re: [Chrysler300] Steering box issue

[Bill Huff <czbill@xxxxxxxxxx>]

If the only thing that was changed was the 
rebuild of the steering box, and the steering 
wheel was straight before the rebuild, then that is where the problem lies.

Bill Huff



At 9/1/201112:46 AM, Bob Jasinski wrote:
>
>
>I am having a fit trying to figure out why my car's steering wheel won't
>align properly now that my rebuilt steering box is back in the car. The
>box works fine, no noise or leaks, but I had it in the alignment shop today,
>and they can align the front end fine, BUT cannot get my steering wheel
>straight. Tonight I dropped the steering column again and removed and
>reinstalled the steering shaft 180 degrees from where it was in hopes that
>now the tie rod end threads won't bottom out before the steering wheel is
>straight. I have my doubts that this will work though. I spoke to the
>rebuilder and he says "we rebuild them to factory specs", although I will be
>calling him again if things don't work out tomorrow.
>
>I've read the service manual to see if there is some internal gear timing
>that must be maintained, and if there is, I can't find it in the book. The
>pitman arm is splined, but has "keys" every 90 degrees, (and was marked by
>the rebuilder with two dots for proper installation alignment) so I can't
>just move it a spline or two. Also, the steering wheel cannot be moved at
>all because it is splined and keyed in one place, I'm sure this is to keep
>the turn signal cancelling cam aligned properly on the steering shaft. My
>alignment guy and I are both scratching our heads. Is it possible my tie
>rod ends somehow have been made with too short of a thread length cut into
>them? Has anybody run into this problem?
>
>Bob J
>
>'61 300G with crooked wheel
>
>
>[Non-text portions of this message have been removed]
>
>


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/