Thanks Ray The switch has 3 wires going to it. I would think there should be 4 wires at the switch. 2 that go to the motor & 1 for ground & 1 for power. I am new at this electrical stuff. could you please explain how the switch does this with only 3 wires. Sorry for being so dumb about this stuff Thanks Larry San Francisco, CA 94111 Larry@xxxxxxxxxx<mailto:L.jabin1007@xxxxxxxxxx> From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Ray Jones Sent: Wednesday, May 12, 2010 2:23 PM Cc: Chrysler 300 Broadcast Subject: Re: [Chrysler300] Bench Testing Chrysler 300 clocks, radios, exc... It's pretty clear. + is power, - is ground. The motor runs when you attach both wires and changes directions when you switch wires. The case is NOT a ground, it's insulated from the motor. Ray On May 12, 2010, at 5:04 PM, Larry Jabin wrote: Ray Could You explain more about the window motors? Is one of the two wires a ground? if so what makes the window go one way or the other? Thanks [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/