Re: Re: [Chrysler300] Rusty plastic?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Re: [Chrysler300] Rusty plastic?



Hi John,

I've never had that problem before , but there is also a product called "CLR"  ( Calcium, Lime, Rust ). I know that we bought a bottle from Walmart. Not sure if it is the right product or not.  You may wnat to try a litle on an older, junk, lens to see if it reacts with the palstic. Or...if you want me to try that just let me know. 
The bottle does say do not use on plastic laminates and Formica. Altough the lense is plastic, it's not really a plastic laminate.

I just put some on an old printer cartridge and nothing happen.

Anyway, this is a product that is made to remove rust, but you may have to ba careful using it. Hope this helps !!!

It was so nice today , I had the Convert. out today.

Charlie Valentine
300G, 62 300 Sport Convertible
  ----- Original Message ----- 
  From: fabe7445@xxxxxxxxxxxxx 
  To: Ron Waters ; 'Chrysler 300 Broadcast' ; L-FORWARDLOOK@xxxxxxxxxxxxx 
  Sent: Thursday, March 22, 2007 2:53 PM
  Subject: Re: Re: [Chrysler300] Rusty plastic?


  Several other options might be "Wink" it removes rust and lime deposits from sinks etc. deposited
  by hard well water. You might also try Naval Jelly for steel. Both are non abrasive and no solvents.

  Jim Faber South Carolina - Spring is here
  > 
  > From: "Ron Waters" <ronbo97@xxxxxxxxxxx>
  > Date: 2007/03/22 Thu PM 01:39:05 EST
  > To: "'Chrysler 300 Broadcast'" <chrysler300@xxxxxxxxxxxxxxx>, 
  > <L-FORWARDLOOK@xxxxxxxxxxxxx>
  > Subject: Re: [Chrysler300] Rusty plastic?
  > 
  > John -
  > 
  > I would start with a new, firm-bristled toothbrush and a dilute solution of
  > rubbing compound. If the results aren't satisfactory, keep strengthening the
  > rubbing compound up to the point where you're using the stuff right from the
  > can. Keep checking every few seconds to determine progress.
  > 
  > If you have a spare lens with a similar condition, best to practice on that
  > one first.
  > 
  > Ron
  > 
  > ----- Original Message ----- 
  > From: "John J. Hertog" <crossram@xxxxxxxxxxxxx>
  > To: "'Chrysler 300 Broadcast'" <chrysler300@xxxxxxxxxxxxxxx>;
  > <L-FORWARDLOOK@xxxxxxxxxxxxx>
  > Sent: Thursday, March 22, 2007 10:23 AM
  > Subject: [Chrysler300] Rusty plastic?
  > 
  > 
  > > Any suggestions as to how to remove rust stains from clear, front parking
  > > light lenses? these stains are on the inside of the lenses, both sides;
  > > and both lenses are in MINT condition - except for the stains. My low
  > > mileage 300F convert. sat in a moist garage for a couple decades, and
  > water
  > > seeped around the housings, into the lenses. I'd like to save them and
  > > reuse them, as they are original to the car. I have tried soaking in
  > > water, scrubbing with various kitchen cleaning stuff and soft bristle
  > brush,
  > > all to no avail. Don't want to use too harsh an abrasive or too hard a
  > > brush so as not to scuff up the plastic. Anyone dealt with this before,
  > or
  > > knows what specific stuff will dissolve rust stains?
  > >
  > > Thanks in advance
  > > John Hertog
  > > Sag Harbor NY
  > >
  > >
  > >
  > >
  > > [Non-text portions of this message have been removed]
  > >
  > >
  > >
  > > To send a message to this group, send an email to:
  > > Chrysler300@xxxxxxxxxxxxxxx
  > >
  > > For list server instructions, go to
  > http://www.chrysler300club.com/yahoolist/inst.htm
  > >
  > > For archives go to http://www.forwardlook.net/300-archive/
  > > Yahoo! Groups Links
  > >
  > >
  > >
  > 
  > 
  > 



   

[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.