Re: [Chrysler300] Rusty plastic?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Rusty plastic?



CLR is great stuff. I tried all kinds of plastic products on an extra  
set of lenses I had and nothing
seemed to work and worse alot of product left marks, but the best  
product I have used is brasso.
We've used brasso for years in the film industry for cleaning and  
polishing plastic and I have to
say that it works better than most products that are meant to clean  
plastic. My 62 tail lights were
in terrible condition, but they look better now with elbow grease and  
brasso.

Sean Duggan
Los Angeles

On Mar 22, 2007, at 8:23 AM, John J. Hertog wrote:

> Any suggestions as to how to remove rust stains from clear, front  
> parking
> light lenses? these stains are on the inside of the lenses, both  
> sides;
> and both lenses are in MINT condition - except for the stains. My low
> mileage 300F convert. sat in a moist garage for a couple decades,  
> and water
> seeped around the housings, into the lenses. I'd like to save them and
> reuse them, as they are original to the car. I have tried soaking in
> water, scrubbing with various kitchen cleaning stuff and soft  
> bristle brush,
> all to no avail. Don't want to use too harsh an abrasive or too hard a
> brush so as not to scuff up the plastic. Anyone dealt with this  
> before, or
> knows what specific stuff will dissolve rust stains?
>
> Thanks in advance
> John Hertog
> Sag Harbor NY
>
>
>
> [Non-text portions of this message have been removed]
>
>
> 



[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.