RE: [Chrysler300] 1957 2-door HT

["Marianne" <marianne@xxxxxxxxxxxxxxxxxx>]

Hi Tony,

I'll respond via the group since my e-mails to you bounced, I don't
think your server likes ours?

I tried Bill's a bit back. They bought up all the old Schotts stock I
think. Don't you wish Schotts were still in business, or that we had all
there tooling? They told me they had virtually no Chrylser stuff left
from this period. Perhaps shipping to OZ freaked them.

Other old part no's of theirs I know were RFP 39C-L and QPFS-16-R These
were qtr panel patch repair sections. 

What is the descriptions of these parts you listed?

I live on the coast just south of Melbourne. I plan to take my little
boy to the RAAF museum in Laverton this holiday season. If there are any
U-2 pics Ill be sure to snap a copy, might be you!

Thanks Tony and best of luck. If these guys do have a good inventory of
parts I would love to know what they have. Interest would be 55 through
to 59.

Sean   

-----Original Message-----
From: Tony Bevacqua [mailto:tonysru2@xxxxxxxxxxx] 
Sent: Tuesday, 9 January 2007 3:06 AM
To: Marianne
Subject: RE: [Chrysler300] 1957 2-door HT

I bought 1 pair of LREP-10A @ $125 each $$250) and 1 pair of DL-43 @ $87
each for $174, plus shipping to CA from Ohio of $16, for a total of
$440.
Bill's Speed Shop, 330-832-9403, or FAX 330-832-2098.  Also, email them.

billsspeedshop@xxxxxxxxxxxxx      

I am getting my rocker panels from Classic Fabrications in South
Carolina,
at $55 each.  843-650-0835

Sean, where are you in OZ?  I used to fly the U-2 out of RAAF Laverton,
in
Melbourne back in 1960 or so.

Good luck.
Tony

-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx]
On
Behalf Of Marianne
Sent: Monday, January 08, 2007 3:37 AM
To: Tony Bevacqua; Chrysler300@xxxxxxxxxxxxxxx
Cc: Sean Morgan
Subject: RE: [Chrysler300] 1957 2-door HT

Hi Tony,

 

Sean from OZ with a 300D

 

If you have any luck with these fender parts and quarters, let me know.
They were available once but I fear no longer. I think these days the
only solution is a tidy parts car!

 

Only luck will be with floor pans and rockers I think.

 

Try www.Classicfabrication.com for these.

 

Good Luck

 

Best

Regards

 

 

Sean in OZ with 300D  

________________________________

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx]
On Behalf Of Tony Bevacqua
Sent: Wednesday, 3 January 2007 3:11 PM
To: Tony Bevacqua
Subject: [Chrysler300] 1957 2-door HT

 

DISREGARD WHAT I TOLD YOU IN PREVIOUS POST, please. According to my body
man I don't have it correct. Here is what he wants me to ask for:

1. Left and right front lower fender panels. (wheel well to the door)
2. Right front rocker panel.
3. Left front rocker panel.
4. Left and right rear lower quarter panels. (wheel well to the door)
5. Left and right rear lower panels (wheel well to the bumper) 

Thanks a lot.

Tony

_____ 

From: Tony Bevacqua [mailto:tonysru2@xxxxxxxxxxx
<mailto:tonysru2%40comcast.net> ] 

I'm trying one more time to ask for the following items and/or help on
locating them. I believe I have tried all the bigger names in the
business,
but who knows??? I believe these items will work off 57 to 59 model
Chryslers and some Desoto's.

I am working on a 1957 New Yorker 2 door coupe, and need the following:

I now need these almost yesterday! Any help on all or any part will be
of
great help. Thanks a lot.

Tony

 



IMPORTANT: This email is intended only for the person(s) to which it is 
addressed and may contain confidential or legally privileged material.
Any 
dissemination or other use of or taking of any action in reliance upon
the 
content of this email by person(s) other than the intended recipient is 
prohibited. If you received this in error, please contact the sender and

delete the email from any computer. Opinions and other information in
this 
email that do not relate to the business of my employer are not given
nor 
endorsed by it. Unencrypted email is not secure and may not be 
authentic. If you have any doubts as to the contents please telephone to

confirm. Spray Nozzle Engineering / Reel - Tech and its related entities

accept no responsibility for changes made to this email or its
attachments 
after transmission from Spray Nozzle Engineering / Reel - Tech and its 
related entities and do not guarantee that this email or attachments are

virus or error free. If you do not wish to receive further emails from
us, 
please forward this email to sales@xxxxxxxxxxxxxxxxxxx



[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links







To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/