[Chrysler300] 413 rebuild

["Carlton Schroeder" <schroe99@xxxxxxxxxxxx>]

Good morning,

Three more questions as I move through the engine rebuild:

1) Is there any more complete on-line source for identifying casting/part no. than mymopar?  I don't have a parts book from 1962.

2) I've looked at mymopar for exhaust manifold casting no. 2268253 but cannot find it - can anyone identify it?  The mopar dealer doesn't know it either.

3) Are there any big block exhaust manifolds, other than something like the Max Wedge manifolds, that would have a 2 1/4 or better yet a 2 1/2" outlet.  I thought there would be numerous 440 manifolds like that but I haven't found any.  I have seen some manifolds that appear to have less restrictive flow lines, but they were also 2" outlet.  I am a little surprised but I guess the 300H had 2" dia. manifold outlets, like all the other models - is that right?  How about that higher horsepower H - did it have larger manifolds?

Thanks for your help.

Carlton.   

[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/