------------------------ Yahoo! Groups Sponsor ---------------------~-->
4 DVDs Free +s&p Join Now
http://us.click.yahoo.com/pt6YBB/NXiEAA/Ey.GAA/8LmulB/TM
---------------------------------------------------------------------~->
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
------------------------------------------------------------------------
There are 15 messages in this issue.
Topics in this digest:
1. Re: Langendorfer HAS A VIRUS
From: "Moana & Gerry Steinberg" <mopar@xxxxxxxxxxxx>
2. 57C light switch
From: "David Zakarian" <arshog@xxxxxxxxx>
3. Transmission Mount for a G
From: "Richard Osborne" <richard@xxxxxxxxxxxx>
4. Re: Fuel Question
From: G Barker <gbarker@xxxxxxxxxxxx>
5. 57 300C air filters
From: "Rusty and Thelma Roe" <saxblowr@xxxxxxxx>
6. Re: 57C light switch
From: "Moana & Gerry Steinberg" <mopar@xxxxxxxxxxxx>
7. 58 Chrysler 300 D Hubcaps
From: "Jennie Caldwell" <caldwel0@xxxxxxxxxxxxx>
8. 300F Hubcaps
From: "Krikhaar, Alex" <akrikhaar@xxxxxxxxxxxxxx>
9. Re: 300F Hubcaps
From: "Moana & Gerry Steinberg" <mopar@xxxxxxxxxxxx>
10. 1 each 300C & 300D hubcaps - wanted
From: "Vath, Michael J." <mjvath@xxxxxxxxx>
11. F front end alignment
From: Lindsey Fiuller <lfuller@xxxxxxx>
12. Re: Fuel Question
From: Gary Nelson <Gary@xxxxxxxxxxxx>
13. Re: 57 300C air filters
From: Gary Nelson <Gary@xxxxxxxxxxxx>
14. Re: 300F Hubcaps
From: G Barker <gbarker@xxxxxxxxxxxx>
15. 1959 300 E speedometer
From: legbrkar@xxxxxxx
________________________________________________________________________
________________________________________________________________________
Message: 1
Date: Tue, 6 Aug 2002 19:59:53 -0700
From: "Moana & Gerry Steinberg" <mopar@xxxxxxxxxxxx>
Subject: Re: Langendorfer HAS A VIRUS
As I recall it was today's date 8/06/02.
Gerry Steinberg
----- Original Message -----
From: <moparpjf@xxxxxxx>
To: <wranderson@xxxxxxxxxxxxx>; <Chrysler300@xxxxxxxxxxxxxxx>;
<mopar@xxxxxxxxxxxx>
Sent: Tuesday, August 06, 2002 6:39 PM
Subject: Re: [Chrysler300] Langendorfer HAS A VIRUS
> In a message dated 08/06/2002 9:12:51 PM Eastern Daylight Time,
> wranderson@xxxxxxxxxxxxx writes:
>
>
> > Hi All: Langendorfer fuel question has a virus. DO NOT OPEN!!!!
> > >Delete immediately. Our Norton Anti Virus picked it up.
> > >Gerry Steinberg
> >
>
> What was the date on the Langendorfer e-mail please? I have no record
of
it,
> and I don't remember Norton picking it up either.
> Thanks,
>
> Pete Fitch
________________________________________________________________________
________________________________________________________________________
Message: 2
Date: Wed, 7 Aug 2002 05:54:57 -0700
From: "David Zakarian" <arshog@xxxxxxxxx>
Subject: 57C light switch
I have a light switch that the dash light dimmer doesn't work on. Anyone
out there know of someone that can repair this?
Zak
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 3
Date: Wed, 07 Aug 2002 12:20:47 -0400
From: "Richard Osborne" <richard@xxxxxxxxxxxx>
Subject: Transmission Mount for a G
Hi,
We just loaded the engine / transmission assembly into a truck to
deliver for installation into the car.
I did a bonehead move and tore the transmission mount. This is the
rubber isolator that goes between the tailshaft and the transmission
mounting brace.
Anybody have one? Where can I get one?
Thanks,
Richard Osborne
________________________________________________________________________
________________________________________________________________________
Message: 4
Date: Wed, 07 Aug 2002 09:50:43 -0700
From: G Barker <gbarker@xxxxxxxxxxxx>
Subject: Re: Fuel Question
I believe there is some reaction between the brass and the float arm.
Every one
of the floats develop a very small pin hole under the float arm and the
grove in
the brass float. I tried soldering the hole and it works for a short time
then
another shows up I think my next one I'm going to put the float on the arm
and
then dip it in gas tank sealer. We will se how that works
Gary Barker
Moana & Gerry Steinberg wrote:
> This has really got my attention. When I lived in Calif. 10 years ago I
> used
> brass floats on everything. Have they changed the gas formula that
much??
> I made it a practice to check new floats in gas, water and anti freeze
> before
> installing them. Never had any problems, not even a defective float.
> What say you all........
> Gerry Steinberg
> Arizona
>
> ----- Original Message -----
> From: "G Barker" <gbarker@xxxxxxxxxxxx>
> To: <pennsy300@xxxxxxx>; "listserver 300 club"
<Chrysler300@xxxxxxxxxxxxxxx>
> Sent: Tuesday, August 06, 2002 3:40 PM
> Subject: Re: [Chrysler300] Fuel Question
>
> > My biggest problem out her in CA. I keep sinking my Brass Floats on
my
> sending units. I
> > have changed each of my cars at least twice. My motor home has three
> tanks and all three
> > have sunk. Just put a new one on my Superbird last week. The only
ones
> that I have not
> > changed more than once are the ones I replaced the brass floats with
> plastic ones. And
> > now I can't find any more plastic ones.
> >
> > Gary Barker
> >
________________________________________________________________________
________________________________________________________________________
Message: 5
Date: Wed, 7 Aug 2002 09:54:19 -0700 (Pacific Daylight Time)
From: "Rusty and Thelma Roe" <saxblowr@xxxxxxxx>
Subject: 57 300C air filters
2 air filters on e-bay for 37.00****** would this be a good price or does
anyone know of another source at a better price????.....these are new oval
for the dual 4's on the 57 300C.......Thanks Rusty in Oregon
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 6
Date: Wed, 7 Aug 2002 09:43:28 -0700
From: "Moana & Gerry Steinberg" <mopar@xxxxxxxxxxxx>
Subject: Re: 57C light switch
Check with Jeff Carter, JC Auto Restoration, 20815 52nd. Ave W#2,
Lynnwood, WA 98036. Ph. 425/672-8324--Fax 425/771-2522
e-mail: jcauto@xxxxxxxxxx
http://www.jcauto.com
We communicate via e-mail most of the time. Will see him in Washington
and Kalispell in about 10 days. He has done my complete instrument
cluster for '61 Chrysler wagon including the clock and the 'power pak'
for the gauges. Highly recommend him.
Gerry Steinberg
Arizona
----- Original Message -----
From: "David Zakarian" <arshog@xxxxxxxxx>
To: "Chrysler Club" <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Wednesday, August 07, 2002 5:54 AM
Subject: [Chrysler300] 57C light switch
> I have a light switch that the dash light dimmer doesn't work on.
Anyone
out there know of someone that can repair this?
>
> Zak
>
________________________________________________________________________
________________________________________________________________________
Message: 7
Date: Wed, 7 Aug 2002 13:20:05 -0400
From: "Jennie Caldwell" <caldwel0@xxxxxxxxxxxxx>
Subject: 58 Chrysler 300 D Hubcaps
Does anyone know where I can get 4 hubcaps for my 1958 Chrysler 300 D?
Thank you,
Chad Caldwell
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 8
Date: Wed, 7 Aug 2002 13:23:15 -0500
From: "Krikhaar, Alex" <akrikhaar@xxxxxxxxxxxxxx>
Subject: 300F Hubcaps
Hi all,
I have another hubcap related question: Does anyone have any suggestions
for
hubcaps I could put on my 300F when taking it into town? I'd hate to see
the
original hubcaps stolen from my car (I live in Chicago). Looking for ideas
for inexpensive good-looking alternates to the real thing.
Thanks,
Alex
________________________________________________________________________
________________________________________________________________________
Message: 9
Date: Wed, 7 Aug 2002 11:52:30 -0700
From: "Moana & Gerry Steinberg" <mopar@xxxxxxxxxxxx>
Subject: Re: 300F Hubcaps
Most wrecking yards have tons of wheel covers. Check with them and
pick what you like. They should have 14 inch covers.
Gerry Steinberg
Arizona
----- Original Message -----
From: "Krikhaar, Alex" <akrikhaar@xxxxxxxxxxxxxx>
To: <chrysler300@xxxxxxxxxxxxxxx>
Sent: Wednesday, August 07, 2002 11:23 AM
Subject: [Chrysler300] 300F Hubcaps
> Hi all,
>
> I have another hubcap related question: Does anyone have any suggestions
for
> hubcaps I could put on my 300F when taking it into town? I'd hate to see
the
> original hubcaps stolen from my car (I live in Chicago). Looking for
ideas
> for inexpensive good-looking alternates to the real thing.
>
> Thanks,
> Alex
>
________________________________________________________________________
________________________________________________________________________
Message: 10
Date: Wed, 7 Aug 2002 14:45:04 -0400
From: "Vath, Michael J." <mjvath@xxxxxxxxx>
Subject: 1 each 300C & 300D hubcaps - wanted
Hubcap day hooray! Might as well join in..
Wanted:
1 - '57 300C cap &
1 - '58 300D cap.
I've found 3 of each year's cap, and now need just one of each to make
complete sets for my 57s. Crappy caps would be fine; these aren't gonna be
showcars on my budget.
Many, many thanks & have a great week. mike v
Ps. Sand is gone; driveway beach is now closed. Thanks to all who
visited. Tonight's driveway activity: car painting. Lawn seating still
available.
-----
________________________________________________________________________
________________________________________________________________________
Message: 11
Date: Wed, 07 Aug 2002 14:07:33 -0500
From: Lindsey Fiuller <lfuller@xxxxxxx>
Subject: F front end alignment
finally put the radials on & will be doing an alignment after a small
front end repair. I appear to have lost the alignment specs for my F
that were posted here some time ago. May not have printed them out
before my hard drive crashed. 1) could someone who has them please
forward them to me, & 2) Any thoughts as to whether the specs should be
different with the radials vs the bias plys. Thanks
Lindsey Fuller
________________________________________________________________________
________________________________________________________________________
Message: 12
Date: Wed, 07 Aug 2002 12:45:55 -0700
From: Gary Nelson <Gary@xxxxxxxxxxxx>
Subject: Re: Fuel Question
Brass float problem.
I repaired a brass sinker for a collector and observed that the loop at
the
end of float arm puts to much pressure on the thin wall of the brass
float.
This causes it to crack.
Remedy: Open up the loop slightly to take off excess pressure. Float
should
actually rotate when in place. Then solder the float arm to the brass
float. You will have to tin float wire arm. You should have a permanent
fix.
Gary, The Parts Doc
At 09:50 AM 8/7/02 , G Barker wrote:
>I believe there is some reaction between the brass and the float
>arm. Every one
>of the floats develop a very small pin hole under the float arm and the
>grove in
>the brass float. I tried soldering the hole and it works for a short
time
>then
>another shows up I think my next one I'm going to put the float on the
arm and
>then dip it in gas tank sealer. We will se how that works
>
> Gary Barker
>
>Moana & Gerry Steinberg wrote:
>
> > This has really got my attention. When I lived in Calif. 10 years ago
I
> > used
> > brass floats on everything. Have they changed the gas formula that
much??
> > I made it a practice to check new floats in gas, water and anti freeze
> > before
> > installing them. Never had any problems, not even a defective float.
> > What say you all........
> > Gerry Steinberg
> > Arizona
> >
> > ----- Original Message -----
> > From: "G Barker" <gbarker@xxxxxxxxxxxx>
> > To: <pennsy300@xxxxxxx>; "listserver 300 club"
> <Chrysler300@xxxxxxxxxxxxxxx>
> > Sent: Tuesday, August 06, 2002 3:40 PM
> > Subject: Re: [Chrysler300] Fuel Question
> >
> > > My biggest problem out her in CA. I keep sinking my Brass Floats on
my
> > sending units. I
> > > have changed each of my cars at least twice. My motor home has
three
> > tanks and all three
> > > have sunk. Just put a new one on my Superbird last week. The only
ones
> > that I have not
> > > changed more than once are the ones I replaced the brass floats with
> > plastic ones. And
> > > now I can't find any more plastic ones.
> > >
> > > Gary Barker
> > >
>
>
>
>To send a message to this group, send an email to:
>Chrysler300@xxxxxxxxxxxxxxx
>
>For list server instructions, go to
>http://www.chrysler300club.com/yahoolist/inst.htm
>
>To unsubscribe from this group, send an email to:
>Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
________________________________________________________________________
________________________________________________________________________
Message: 13
Date: Wed, 07 Aug 2002 12:48:11 -0700
From: Gary Nelson <Gary@xxxxxxxxxxxx>
Subject: Re: 57 300C air filters
My parts store sells new replacement about $7 ea. last time I checked.
Gary, The parts Doc
At 09:54 AM 8/7/02 , Rusty and Thelma Roe wrote:
>2 air filters on e-bay for 37.00****** would this be a good price or does
>anyone know of another source at a better price????.....these are new
oval
>for the dual 4's on the 57 300C.......Thanks Rusty in Oregon
>
>[Non-text portions of this message have been removed]
>
>
>
>To send a message to this group, send an email to:
>Chrysler300@xxxxxxxxxxxxxxx
>
>For list server instructions, go to
>http://www.chrysler300club.com/yahoolist/inst.htm
>
>To unsubscribe from this group, send an email to:
>Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
________________________________________________________________________
________________________________________________________________________
Message: 14
Date: Wed, 07 Aug 2002 15:41:32 -0700
From: G Barker <gbarker@xxxxxxxxxxxx>
Subject: Re: 300F Hubcaps
Baby Moons with Outer trim rings if you like the smooth custom look.
Gary Barker
"Krikhaar, Alex" wrote:
> Hi all,
>
> I have another hubcap related question: Does anyone have any suggestions
for
> hubcaps I could put on my 300F when taking it into town? I'd hate to see
the
> original hubcaps stolen from my car (I live in Chicago). Looking for
ideas
> for inexpensive good-looking alternates to the real thing.
>
> Thanks,
> Alex
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
________________________________________________________________________
________________________________________________________________________
Message: 15
Date: Wed, 7 Aug 2002 21:32:53 EDT
From: legbrkar@xxxxxxx
Subject: 1959 300 E speedometer
need to know how much a 1959 300 e 150 mph speedometer is worth any help
will be greatly appreciated
bob mundo
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<<attachment: winmail.dat>>
Back to the Home of the Forward Look Network
Archive Sitemap