RE: {Chrysler 300} Fwd: Brake overhaul kits

Just to add to Nick’s list, I have used Andy Bernbaum (oldMoparts.com) for springs. RockAuto is my go-to for most everything. But Amazon is also a good source, with free shipping and faster delivery. You just need to know the correct aftermarket part number for what you are looking for.

The attachment shows the correct tool, called a Tapered Axle Puller, for removing the rear drums. Or you can purchase the Les Fairbanks puller, which a lot of folks like. I believe there is a link on the club’s website.

Ron

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx On Behalf Of Nick Taylor
Sent: Wednesday, March 26, 2025 11:19 AM
To: Jay Williamson <letterpressman@xxxxxxxxxx>
Cc: Club International Chrysler <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} Fwd: Brake overhaul kits

Jay,

I just did the brakes on my 1960 Imperial, which is pretty much the same as the 300F. I got the shoes, hoses and wheel cylinders from Rock Auto. I used Raybestos for the wheel cylinders and shoes. A friend used Centric wheel cylinders and had a lot of problems with them. The seals and bearings shouldn't be a problem.

Some of the hardware can be tricky but if your springs are good, reuse them. Make sure your brake supports are good and that the adjusters work. They can get stuck and then people round off the adjuster hex. They should be really stiff, but no so stiff that you can't turn them mounted on the car.

If you haven't pulled your rear drums yet, make sure you get a proper puller.

Nick

On Wed, Mar 26, 2025 at 5:23 AM 'Jay Williamson' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Sent from my iPad

Begin forwarded message:
From: Jay Williamson <letterpressman@xxxxxx>
Date: March 26, 2025 at 7:38:59 AM EDT
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: Brake overhaul kits
Hello,
Here is another question as I work on the major systems for my 300 F. It looks like I will need to replace brake parts on my 300 F. I’ve been looking through the usual suspect list and haven’t been able to find anyone that carries all the parts for a 1960 300. I did find the attached kit from Kanters, but they really aren’t on the clubs trusted list. Does anyone know about these kits or have a reliable source where I can purchase a kit? I’ll need shoes, springs, hoses and wheel cylinders.

Thanks!

1960-1961 Chrysler 300, 1960-1961 Chrysler Imperial, 1960-1961 Chrysler New Yorker and others - Master Brake Overhaul Kit - BOKMWCHR601 - Kanter Auto
kanter.com

Sent from my iPad
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/866077EB-0E0A-4AE6-9D70-F199FA395B22%40icloud.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFMkDi7wG-AQX75zS9J0Ke9G8Hm9gG6owR-b7ANPcvyXPg%40mail.gmail.com.