Re: {Chrysler 300} Fwd: Brake overhaul kits
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} Fwd: Brake overhaul kits



Thank you Noel. I hope they are too
Jay Williamson
317-223-1379


On Mar 26, 2025, at 12:05 PM, 'Noel Hastalis' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:


Jay,
 
Hoping your front drums are still serviceable. If not, here's a shop that relines them - has an excellent reputation - and is expensive -
 
J&G Brake Drum Relining
Jordan & Don
(815) 276-2578
212 N Green St., McHenry, IL 60050
 
Noel
 
On 03/26/2025 10:18 AM CDT Nick Taylor <nicksgaragesd@xxxxxxxxx> wrote:
 
Jay,
 
I just did the brakes on my 1960 Imperial, which is pretty much the same as the 300F. I got the shoes, hoses and wheel cylinders from Rock Auto. I used Raybestos for the wheel cylinders and shoes. A friend used Centric wheel cylinders and had a lot of problems with them. The seals and bearings shouldn't be a problem.
 
Some of the hardware can be tricky but if your springs are good, reuse them. Make sure your brake supports are good and that the adjusters work. They can get stuck and then people round off the adjuster hex. They should be really stiff, but no so stiff that you can't turn them mounted on the car. 
 
If you haven't pulled your rear drums yet, make sure you get a proper puller.
 
Nick

On Wed, Mar 26, 2025 at 5:23 AM 'Jay Williamson' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Sent from my iPad

Begin forwarded message:

From: Jay Williamson <letterpressman@xxxxxx>
Date: March 26, 2025 at 7:38:59 AM EDT
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: Brake overhaul kits

Hello,
Here is another question as I work on the major systems for my 300 F. It looks like I will need to replace brake parts on my 300 F. I’ve been looking through the usual suspect list and haven’t been able to find anyone that carries all the parts for a 1960 300. I did find the attached kit from Kanters, but they really aren’t on the clubs trusted list. Does anyone know about these kits or have a reliable source where I can purchase a kit? I’ll need shoes, springs, hoses and wheel cylinders.
 
Thanks!
 

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/866077EB-0E0A-4AE6-9D70-F199FA395B22%40icloud.com.

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFMkDi7wG-AQX75zS9J0Ke9G8Hm9gG6owR-b7ANPcvyXPg%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/441C69C4-C468-4B72-9BC7-FD861D3FE158%40icloud.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.